SOM-2079-001_w.pdf - 第140页
137 SOM-2079 6.14 自動教示 Table 16 異常 ID 異常名、説明、要因および復帰方法 600101 PCB recog camera & beam offset teach. ----- 600102 PCB recog camera & beam offset teach. ----- 600103 PCB recog camera & beam offset teach. ----- …
136
SOM-2079
異常 ID 異常名、説明、要因および復帰方法
510e02 Auto Run Error
Di
splacement of fiducial mark occurred at the fiducial mark recognition (front)
during auto operation.
Perform the beam offset teaching and check if the beam X/Y has deviation.
510e03 Auto Run Error
A r
ecognition error occurred at the fiducial mark recognition (rear) during auto
operation.
-----
510e04 Auto Run Error
A r
ecognition error occurred at the fiducial mark recognition (front) during auto
operation.
-----
510e05 Auto Run Error
Th
e Recog, operation of the fiducial mark (rear) was not completed within the
specified time.
-----
510e06 Auto Run Error
Th
e Recog, operation of the fiducial mark (front) was not completed within the
specified time.
-----
510f01 Auto Run Error
It failed in the auto zeroing operation by pushing STOP PB or other stage's error.
Please start again.
510f02 Auto Run Error
It failed in the auto zeroing operation by pushing STOP PB or other stage's error.
Please start again.
510f03 Auto Run Error
It failed in the auto zeroing operation. (NL axis)
Please do the zeroing operation of stage 1 by the control menu.
510f04 Auto Run Error
It failed in the auto zeroing operation. (NL axis)
Please do the zeroing operation of stage 2 by the control menu.
510f05 Auto Run Error
It failed in the auto zeroing operation. (DD axis)
Please do the zeroing operation of stage 1 by the control menu.
510f06 Auto Run Error
It failed in the auto zeroing operation. (DD axis)
Please do the zeroing operation of stage 1 by the control menu.
510f07 Auto Run Error
Motor positioning error(HL axis)
When
the
fly was recognized, the positioning delay of the HL axis was detected.
Please exchange HL axes when happening frequently.
1005-001
6.13 生産運転異常
137
SOM-2079
6.14 自動教示
Table 16
異常 ID 異常名、説明、要因および復帰方法
600101 PCB recog camera & beam offset teach.
-----
600102 PCB recog camera & beam offset teach.
-----
600103 PCB recog camera & beam offset teach.
-----
600104 PCB recog camera & beam offset teach.
-----
600105 PCB recog camera & beam offset teach.
-----
600106 PCB recog camera & beam offset teach.
-----
600107 PCB recog camera & beam offset teach.
-----
600108 PCB recog camera & beam offset teach.
-----
600109 PCB recog camera & beam offset teach.
-----
600201 Comp. Recog Camera offset teach.
The glass Jig can not able to be recognized.
-----
600202 Comp. Recog Camera offset teach.
It entered in a specifi
ed frequency or less and it did not enter a permissible value.
-----
600203 Comp. Recog Camera offset teach.
-----
600301 Head Rotate Theta Axis offset
-----
600302 Head Rotate Theta Axis offset
-----
1005-001
6.14 自動教示
138
SOM-2079
異常 ID 異常名、説明、要因および復帰方法
600303 Head Rotate Theta Axis offset
-----
600401 Head Rotate center offset teach
-----
600402 Head Rotate center offset teach
-----
600501 Reference mark position teach
-----
600502 Reference mark position teach
-----
600503 Reference mark position teach
-----
600504 Reference mark position teach
-----
600601 Nozzle position offset teach
-----
600602 Nozzle position offset teach
-----
600701 Fly recog Offset teach
-----
600702 Fly recog Offset teach
-----
600703 Fly recog Offset teach
-----
600704 Fly recog Offset teach
-----
600801 Feeder offset(A) teach
Please push the Feeder Ready SW
-----
600802 Feeder offset(A) teach
Feeder recog Mark Error
Manual Alignment
1005-001
6.14 自動教示