SOM-2079-001_w.pdf - 第111页
108 SOM-2079 1005-001 異常 ID 異常名、説明、要因および復帰方法 490724 Nozzle set-up Failed in the nozzle change on the multi-functional head. Confirm the data in the Stocker of the Placement Head/ Nozzle data. ----- 490725 Nozzle set-up Ti…
107
SOM-2079
1005-001
異常 ID 異常名、説明、要因および復帰方法
490711 Nozzle set-up
The remains nozzle was detected on the head.
Please confirm the nozzle has not adhered to the position. Moreover, please
clean the linear measure when not adhering.
490712 Nozzle set-up
The linear measure error occurred in the head nozzle existence check.
Please confirm the nozzle arrangement, and execute the level teaching.
490713 Nozzle set-up
The nozzle exchange sequence error occurred.
Please confirm the nozzle placement.
490714 Nozzle set-up
The nozzle placement in Nozzle stocker is different from the nozzle data.
Please confirm the nozzle placement.
490715 Nozzle set-up
It failed in nozzle ID detection.
Please confirm the nozzle ID.
490716 Nozzle set-up
Time-out of close nozzle stocker operation.
Nozzle stocker was opened for safety. Please confirm whether there is no rise to
the surface the nozzle is not in opening and shutting caught state.
490717 Nozzle set-up
A PCB was detected on the input conveyor.
Remove the P.C.B. from the input conveyor.
490718 Nozzle set-up
A PCB was detected on the positioning 1 conveyor.
Remove the P.C.B. from the positioning 1conveyor.
490719 Nozzle set-up
A PCB was detected on the central conveyor.
Remove the P.C.B. from the center conveyor.
490720 Nozzle set-up
A PCB was detected on the positioning 2 conveyor.
Remove the P.C.B. from the positioning 2 conveyor.
490721 Nozzle set-up
A PCB was detected on the output conveyor.
Remove the P.C.B. from the output conveyor.
490722 Nozzle set-up
A
n
error occurred with the nozzle existence check in the stocker before the nozzle
is stored.
-----
490723 Nozzle set-up
It failed in the nozzle storage check. Confirm the recognition image and select the
nozzle existence.
-----
6.9 自動段取り
108
SOM-2079
1005-001
異常 ID 異常名、説明、要因および復帰方法
490724 Nozzle set-up
Failed in the nozzle change on the multi-functional head. Confirm the data in the
Stocker of the Placement Head/ Nozzle data.
-----
490725 Nozzle set-up
Time-out of Nozzle Setup.
Please start production again.
490801 Program -change linked operation
Program-change linked operation was not finished within appointed time.
-----
496001 Support Pins/Jig detection
Support pins/Jig were detected at the stage 1 NB_W1 axis.
Remove the support pins/Jig from the backup base.
496002 Support Pins/Jig detection
Support pins/Jig were detected at the stage 1 NB_W2 axis.
Remove the support pins/Jig from the backup base.
496003 Support Pins/Jig detection
Support pins/Jig were detected at the stage 2 NB_W1 axis.
Remove the support pins/Jig from the backup base.
496004 Support Pins/Jig detection
Support pins/Jig were detected at the stage 2 NB_W2 axis.
Remove the support pins/Jig from the backup base.
496005 Support Pins/Jig detection
Support pins/Jig were detected at the NB_W1 axis.
Remove the support pins/Jig from the backup base.
496006 Support Pins/Jig detection
Support pins/Jig were detected at the NB_W2 axis.
Remove the support pins/Jig from the backup base.
496007 Support Pins/Jig detection
Support pins/Jig were detected at the stage 1 NA_W1 axis (Lane A).
Remove the support pins/Jig from the backup base.
496008 Support Pins/Jig detection
Support pins/Jig were detected at the stage 1 NA_W3 axis (Lane B).
Remove the support pins/Jig from the backup base.
496009 Support Pins/Jig detection
Support pins/Jig were detected at the stage 2 NC_W1 axis (Lane A).
Remove the support pins/Jig from the backup base.
49600a Support Pins/Jig detection
Support pins/Jig were detected at the stage 2 NC_W3 axis (Lane B).
Remove the support pins/Jig from the backup base.
49600b Support Pins/Jig detection
Support pins/Jig were detected at the NA_W1 axis (Lane A).
Remove the support pins/Jig from the backup base.
6.9 自動段取り
109
SOM-2079
1005-001
異常 ID 異常名、説明、要因および復帰方法
49600c Support Pins/Jig detection
Support pins/Jig were detected at the NA_W3 axis (Lane B).
Remove the support pins/Jig from the backup base.
496101 Conveyor Width Automatic Set-up
The initialization is imperfect.
Power on the machine again. The transfer driver has a problem.
496102 Conveyor Width Automatic Set-up
It failed in zeroing operation.
Perform zeroing operation.
496103 Conveyor Width Automatic Set-up
An alarm for the interference is occurring.
-----
496104 Conveyor Width Automatic Set-up
DI was detected.
-----
496105 Conveyor Width Automatic Set-up
The conveyor cover opened.
Close the conveyor cover.
496106 Conveyor Width Automatic Set-up
Voltage reduction on the power source was detected.
Check the transfer driver.
496107 Conveyor Width Automatic Set-up
OT (+) was detected during auto operation.
Perform zeroing operation.
496108 Conveyor Width Automatic Set-up
OT (-) was detected during auto operation.
Perform zeroing operation.
496201 Conveyor Width Automatic Set-up (Input conveyor W2)
The initialization is imperfect.
Power on the machine again. The transfer driver has a problem.
496202 Conveyor Width Automatic Set-up (Input conveyor W2)
It failed in zeroing operation.
Perform zeroing operation.
496203 Conveyor Width Automatic Set-up (Input conveyor W2)
An alarm for the interference is occurring.
-----
496204 Conveyor Width Automatic Set-up (Input conveyor W2)
DI was detected.
-----
496205 Conveyor Width Automatic Set-up (Input conveyor W2)
The conveyor cover opened.
Close the conveyor cover.
496206 Conveyor Width Automatic Set-up (Input conveyor W2)
Voltage reduction on the power source was detected.
Check the transfer driver.
6.9 自動段取り