SOM-2079-001_w.pdf - 第28页
25 SOM-2079 1005-001 異常 ID 異常名、説明、要因および復帰方法 422314 Cnvr Positioning1 Error Ocorreu um erro durante posicionamento da PCB ----- 422315 Cnvr Positioning1 Error Slowdown operation was not carried out at the time of carrying…
24
SOM-2079
1005-001
異常 ID 異常名、説明、要因および復帰方法
422208 Cnvr Positioning1 PCB Detection
PCB detectada no sensor de entrada
Po
r favor, retorne a PCB para a posição correta se ela estiver entre os conveyors,
caso contrário, remova a PCB e verifique o funcionamento dos sensores
422301 Cnvr Positioning1 Error
Não foi possível iniciar o processo de entrada de PCB
-----
422302 Cnvr Positioning1 Error
Ocorreu um erro durante o transporte da PCB
Por favor, verifique posicionamento da PCB no conveyor e continue a operação
422303 Cnvr Positioning1 Error
Não foi possível iniciar o processo de saída da PCB
-----
422304 Cnvr Positioning1 Error
Ocorreu um erro durante o processo de saída da PCB
Por favor, verifique posicionamento da PCB no conveyor e continue a operação
422305 Cnvr Positioning1 Error
Ocorreu um erro durante a subida da mesa
-----
422306 Cnvr Positioning1 Error
Ocorreu um erro durante a descida da mesa
-----
422307 Cnvr Positioning1 Error
Ocorreu um erro durante a subida do stopper
Por favor verifique o funcionamento do stopper
422308 Cnvr Positioning1 Error
Ocorreu um erro durante a descida do stopper
Por favor verifique o funcionamento do stopper
422309 Cnvr Positioning1 Error
Não foi possível iniciar o processo de posicionamento
-----
422310 Cnvr Positioning1 Error
Ocorreu um erro durante a operação de posicionamento
Por favor, verifi
que posicionamento da PCB no conveyor e continue a operação
422311 Cnvr Positioning1 Error
Não foi possível iniciar o processo de posicionamento
-----
422312 Cnvr Positioning1 Error
Ocorreu um erro durante a operação de posicionamento
Por favor, verifique posicionamento da PCB no conveyor e continue a operação
422313 Cnvr Positioning1 Error
Ocorreu um erro durante posicionamento da PCB
Por favor, verifique o posicionamento da PCB e dos pinos
6.3 コンベア
25
SOM-2079
1005-001
異常 ID 異常名、説明、要因および復帰方法
422314 Cnvr Positioning1 Error
Ocorreu um erro durante posicionamento da PCB
-----
422315 Cnvr Positioning1 Error
Slowdown operation was not carried out at the time of carrying-in operation.
Please check whether the sensor of a conveyor is operating normally and check
whether a P.C.B can convey normally by manual conveyance.
422316 Cnvr Positioning1 Error
Rise operation of a reversal PCB stopper is not completed.
Por favor verifique o funcionamento do stopper
422317 Cnvr Positioning1 Error
Downward operation of a reversal PCB locate stopper is not completed.
Por favor verifique o funcionamento do stopper
422318 Cnvr Positioning1 Error
The PCB was transported a predetermined distance, but the operation was not
completed.
There is a possibility that the P.C.B fell over from conveyer whether a board is
caught. Please confi
rm it over a conveyer.
422319 Cnvr Positioning1 Error
The process of inside signal between conveyors failed.
Por favor, verifique posicionamento da PCB no conveyor e continue a operação
422320 Cnvr Positioning1 Error
The PCB transfer operation could not start.
-----
422321 Cnvr Positioning1 Error
An error was detected in transferring the PCB.
Por favor, verifique posicionamento da PCB no conveyor e continue a operação
422322 Cnvr Positioning1 Error
Speed reduction was not performed during transferring operation.
Please return the P.C.B. to the proper position when it is sitting between the
conveyors otherwise, remove the P.C.B. And, the P.C.B. detection sensor might
have had a wrong detection, so please check it to make detections correctly.
422323 Cnvr Positioning1 Error
A servo error was found in the movement that the backup base was rising. The
backup jig and pins may be left under the transfer rail.
Cancel the error and perform zeroing operation after that, open the cover to
remove the left backup jig and pins under the transfer rail. Perform the setup
operation again to set the backup jig and the pins to the proper positions.
422324 Cnvr Positioning1 Error
Support pins /Jig were detected before the backup base starts to rise.
Remove the support pins / jig from the backup base. If the removing operation is
diffi
cult, perform the function to move the support pin changing position.
6.3 コンベア
26
SOM-2079
1005-001
異常 ID 異常名、説明、要因および復帰方法
422325 Cnvr Positioning1 Error
Error data was transferred in the process of the bad mark transfer.
Remove the P.C.B. and delete the Bad Mark information after checking the
number of the unit P.C.B.'s in the pattern program.
423101 Input Cnvr PCB Overtime
The PCB transport (carry in) from Cnvr Positioning1 did not end in prescribed
time.
Por favor, verifi
que posicionamento da PCB no conveyor e continue a operação
423102 Input Cnvr PCB Overtime
The PCB transport (exhaust) to Cnvr Positioning1 did not end in prescribed time.
Por favor, verifique posicionamento da PCB no conveyor e continue a operação
423103 Input Cnvr PCB Overtime
The reversal positioning operation did not end in prescribed time.
Por favor, verifique posicionamento da PCB no conveyor e continue a operação
423201 Input Cnvr PCB Detection
There are 2 PCB's around the inlet and the outlet on the conveyor.
Por favor, verifique posicionamento da PCB no conveyor e continue a operação
423202 Input Cnvr PCB Detection
There is no PCB on the conveyer. After the PCB carrying in ended, it can not able
to be detected.
Por favor, verifique posicionamento da PCB no conveyor e continue a operação
423203 Input Cnvr PCB Detection
The conveyer entrance sensor detected PCB
Por favor, verifique posicionamento da PCB no conveyor e continue a operação
423204 Input Cnvr PCB Detection
The PCB was detected with the conveyer entrance sensor.
Please remove the P.C.B on a conveyor. Production can be continued.
423301 Input Cnvr Error
The carrying in operation was not able to begin.
-----
423302 Input Cnvr Error
The error was detected while carrying in was operating.
Por favor, verifique posicionamento da PCB no conveyor e continue a operação
423303 Input Cnvr Error
The exhaust operation was not able to begin.
-----
423304 Input Cnvr Error
The error was detected while exhaust was operating.
Por favor, verifique posicionamento da PCB no conveyor e continue a operação
423305 Input Cnvr Error
The reversal positioning operation was not able to begin.
-----
423306 Input Cnvr Error
The error was detected while the reversal positioning was operating.
Por favor, verifique posicionamento da PCB no conveyor e continue a operação
6.3 コンベア