SOM-2079-001_w.pdf - 第116页
1 13 SOM-2079 1005-001 異常 ID 異常名、説明、要因および復帰方法 496768 Standard Position Adjustment Error An overrun sensor (-) was detected during output conveyor operation. Perform the zeroing operation for the output conveyor. 496801 T…
112
SOM-2079
1005-001
異常 ID 異常名、説明、要因および復帰方法
496605 Conveyor Width Automatic Setup (Output conveyor W2)
The conveyor cover opened.
Close the conveyor cover.
496606 Conveyor Width Automatic Setup (Output conveyor W2)
Voltage reduction on the power source was detected.
Check the transfer driver.
496607 Conveyor Width Automatic Setup (Output conveyor W2)
OT (+) was detected during auto operation.
Perform zeroing operation.
496608 Conveyor Width Automatic Setup (Output conveyor W2)
OT (-) was detected during auto operation.
Perform zeroing operation.
496717 Standard Position Adjustment Error
An overrun sensor (+) was detected during input conveyor operation.
Perform the zeroing operation for the input conveyor.
496718 Standard Position Adjustment Error
An overrun sensor (-) was detected during input conveyor operation.
Perform the zeroing operation for the input conveyor.
496727 Standard Position Adjustment Error
An overrun sensor (+) was detected during input conveyor operation.
Perform the zeroing operation for the input conveyor.
496728 Standard Position Adjustment Error
An overrun sensor (-) was detected during input conveyor operation.
Perform the zeroing operation for the input conveyor.
496737 Standard Position Adjustment Error
An overrun sensor (+) was detected during positioning conveyor operation.
Perform the zeroing operation for the positioning conveyor.
496738 Standard Position Adjustment Error
An overrun sensor (-) was detected during positioning conveyor operation.
Perform the zeroing operation for the positioning conveyor.
496747 Standard Position Adjustment Error
An overrun sensor (+) was detected during positioning conveyor operation.
Perform the zeroing operation for the positioning conveyor.
496748 Standard Position Adjustment Error
An overrun sensor (-) was detected during positioning conveyor operation.
Perform the zeroing operation for the positioning conveyor.
496757 Standard Position Adjustment Error
An overrun sensor (+) was detected during output conveyor operation.
Perform the zeroing operation for the output conveyor.
496758 Standard Position Adjustment Error
An overrun sensor (-) was detected during output conveyor operation.
Perform the zeroing operation for the output conveyor.
496767 Standard Position Adjustment Error
An overrun sensor (+) was detected during output conveyor operation.
Perform the zeroing operation for the output conveyor.
6.9 自動段取り
113
SOM-2079
1005-001
異常 ID 異常名、説明、要因および復帰方法
496768 Standard Position Adjustment Error
An overrun sensor (-) was detected during output conveyor operation.
Perform the zeroing operation for the output conveyor.
496801 Transfer Communication Error
An error occurred in the transfer driver comunications.
1. Check the communications cable.\r\n2. Check the power cable.\r\n3. Check
transfer motor driver's address setting.\r\n4. Check the fuse[F1,F2,F3] on [U85] in
CPU2. If the fuse is blown, replace [U85] board.
496802
-----
496803
-----
496804
-----
6.9 自動段取り
114
SOM-2079
1005-001
6.10 ヘッド関係
Table 12
異常 ID 異常名、説明、要因および復帰方法
4A0101 Head Zero Return
NL axis zeroing Error. Please confirm the nozzle has not fallen when you push
the beam by the hand.
When the lock of a safety door cannot be canceled, please push an emergency
stop button. (Please confirm the nozzle has not fallen when you push the beam
by the hand.) Please check error on a "MAINT-DVC CHK- MOTOR" screen.
4A0102 Head Zero Return
HL axis zeroing Error. Please confirm the nozzle has not fallen when you push
the beam by the hand.
When the lock of a safety door cannot be canceled, please push an emergency
stop button. (Please confirm the nozzle has not fallen when you push the beam
by the hand.) Please check error on a "MAINT-DVC CHK- MOTOR" screen.
4A0103 Head Zero Return
L1 axis zeroing Error. Please confirm the nozzle has not fallen when you push the
beam by the hand.
When the lock of a safety door cannot be canceled, please push an emergency
stop button. (Please confirm the nozzle has not fallen when you push the beam
by the hand.) Please check error on a "MAINT-DVC CHK- MOTOR" screen.
4A0104 Head Zero Return
L2 axis zeroing Error. Please confirm the nozzle has not fallen when you push the
beam by the hand.
When the lock of a safety door cannot be canceled, please push an emergency
stop button. (Please confirm the nozzle has not fallen when you push the beam
by the hand.) Please check error on a "MAINT-DVC CHK- MOTOR" screen.
4A0105 Head Zero Return
L3 axis zeroing Error. Please confirm the nozzle has not fallen when you push the
beam by the hand.
When the lock of a safety door cannot be canceled, please push an emergency
stop button. (Please confirm the nozzle has not fallen when you push the beam
by the hand.) Please check error on a "MAINT-DVC CHK- MOTOR" screen.
4A0201 NL Axis Warming Up
An error was found at the motor (rear).
-----
4A0202 NL Axis Warming Up
An error was found at the motor (front).
-----
4A0203 NL Axis Warming Up
A parameter error was found at the motor (rear).
-----
4A0204 NL Axis Warming Up
A parameter error was found at the motor (front).
-----
6.10 ヘッド関係