SOM-2079-001_w.pdf - 第129页
126 SOM-2079 異常 ID 異常名、説明、要因および復帰方法 4b2403 Feeder (Movement Error) Alarm Code:E2 - Origin Position Checking Error (Excessively out of the origin during servo ON) If the error occurs frequently, replace the feeder. (It ma…
125
SOM-2079
異常 ID 異常名、説明、要因および復帰方法
4b2306 Feeder (Servo Error)
Alarm Code:A5 - Fault Speed Error (Tape catching)
Confirm whether or not the tape is being jammed on the path./ Confi
rm the reel to
operate smoothly./ Confirm whether or not some components and dust are being
caught in the sprocket./ Confirm whether or not some components and dust are
being caught in the
4b2307 Feeder (Servo Error)
Alarm Code:A6 - Others
-----
4b2308 Feeder (Servo Error)
Alarm Code:A7 - Fault Load Error (Tape twisting, Catching foreign substances)
Confirm whether or not the tape is being jammed on the path./ Confi
rm the reel to
operate smoothly./ Confirm whether or not some components and dust are being
caught in the sprocket./ Confirm whether or not some components and dust are
being caught in the
4b2309 Feeder (Servo Error)
Alarm Code:A8 - Encoder Error (Breaking wire, Breakdown of control PCB and
Defective servo motor)
Please replace the feeder.
4b230a Feeder (Servo Error)
Alarm Code:Ab - System Error
Please replace the feeder. (It may be caused by trouble of the control P.C.B..)
4b230b Feeder (Servo Error)
Alarm Code:Ac - Reckless Run Detection Error
Please replace the feeder. (It may be caused by trouble of the control P.C.B..)
4b230c Feeder (Servo Error)
Alarm Code:Ad - Excessive deviation in position
If the error occurs frequently, replace the feeder. (It may be caused by trouble of
the control P.C.B..)
4b2401 Feeder (Movement Error)
Alarm Code:E0 - (1)Damaged cover tape/ (2)Cover tape jammed in the storage/
(3)Splicing section peeling off
(1) Confirm whether or not the cover tape is set correctly/
(2) Please remove the cover tape from the storage section./
(3)
Please check the splicing condition if the work performed correctly in the
process.
4b2402 Feeder (Movement Error)
Alarm Code:E1 - Cover tape peeling off error (Get caught up)
(1) Confirm whether or not the cover tape is set correctly./
(2) Confirm whether or not some stickum has adhered to the suppressor./
(3) Confi
rm the splicing condition if the work performed correctly in the process.
1005-001
6.11 その他
126
SOM-2079
異常 ID 異常名、説明、要因および復帰方法
4b2403 Feeder (Movement Error)
Alarm Code:E2 - Origin Position Checking Error (Excessively out of the origin
during servo ON)
If the error occurs frequently, replace the feeder. (It may be caused by trouble of
the control P.C.B..)
4b2405 Feeder (Movement Error)
Alarm Code:E4 - Positioning Completion Timeout (Foreign substances in the
sprocket wheel)
Confi
rm whether or not the tape is being jammed on the path./ Confi
rm the reel to
operate smoothly./ Confirm whether or not some components and dust are being
caught in the sprocket.
4b2406 Feeder (Movement Error)
Alarm Code:E5 - Redundant Order Error
-----
4b2407 Feeder (Movement Error)
Alarm Code:E6 - Lane Change Timeout Error
If the error occurs frequently, replace the feeder. (It may be caused by trouble of
the control P.C.B..)
4b2408 Feeder (Movement Error)
Alarm Code:E7 - Servo ON Timeout
If the error occurs frequently, replace the feeder. (It may be caused by trouble of
the control P.C.B..)
4b2410 Feeder (Movement Error)
A pick-up error occurred due to feeder operation problem. Please check the
feeder and the component.
-----
4b2411 Feeder (Movement Error)
Alarm Code:E5 - Redundant Order Error (A feeding error may occur.)
Confi
rm whether or not the tape is being jammed on the path./ Confi
rm the reel to
operate smoothly./ Confirm whether or not some components and dust are being
caught in the sprocket./ Confirm whether or not some components and dust are
being caught in the
4b2421 Feeder (Movement Error)
Alarm Code: E0 - Deviated origin position of the belt transfer servo motor axis
Check whether or not the shield plate position attached to the belt transfer servo
motor axis deviated.
4b2422 Feeder (Movement Error)
Alarm Code:E1 - RS section Driving Error
Check whether or not dust adheres to the sensor position of the PS unit startup
trigger.
4b2425 Feeder (Movement Error)
Alarm Code:E4 - Positioning Completion Timeout
Check whether or not foreign particles get into the servo motor timing belt and
worm axis /worm wheel sections.
1005-001
6.11 その他
127
SOM-2079
異常 ID 異常名、説明、要因および復帰方法
4b2426 Feeder (Movement Error)
Alarm Code:E5 - Redundant Order Error
-----
4b2427 Feeder (Movement Error)
Alarm Code:E6 - Timeout Error in Changing Servo Motor Axis
-----
4b2428 Feeder (Movement Error)
Alarm Code:E7 - Servo ON Timeout
-----
4b24a1 Feeder (Movement Error)
An error occurred before the feeder operation.
-----
4b24a2 Feeder (Movement Error)
An error occurred in the feeder operation.
-----
4b24a3 Feeder (Movement Error)
Feeder error (feeding time-out)
-----
4b2501 Failed Splicing Operation
Alarm Code:E3 - (1)No supplied history/ (2)Dirty splicing detection sensor (dust
adhesion)
(1) Please operate to resupply components in the machine after splicing
operation./ (2) Please clean the joint detection sensor.
4b2601 Unit PCB BBR Information
There is no information in the relevant PCB (on the Transfer Conveyor).
Delete the BBR information after removing the P.C.B..
4b2602 Unit PCB BBR Information
There is no information in the relevant PCB (on the Transfer XY-Table).
Delete the BBR information after removing the P.C.B..
4b2603 Unit PCB BBR Information
A problem was found in the unit PCB BBR information.
Delete the BBR information after removing the P.C.B..
4b2701 Start Process(Feeder Connect Error)
A special feeder is appointed. Please confi
rm the model of a set feeder.
-----
4b2702 Start Process(Feeder Connect Error)
A special feeder is set. Please confirm the model of a set feeder.
-----
4b2711 Start Process(Feeder Connect Error)
ACV Check Error. Component ID on the feeder is not same as one specified by
current program.
-----
4b2712 Start Process(Feeder Connect Error)
Set "enable" for destination alternate feeder.
-----
1005-001
6.11 その他