SOM-2079-001_w.pdf - 第113页

1 10 SOM-2079 1005-001 異常 ID 異常名、説明、要因および復帰方法 496207 Conveyor Width Automatic Set-up (Input conveyor W2) OT (+) was detected during auto operation. Perform zeroing operation. 496208 Conveyor Width Automatic Set-up (Input…

100%1 / 179
109
SOM-2079
1005-001
異常 ID 異常名、説明、要因および復帰方法
49600c Support Pins/Jig detection
Support pins/Jig were detected at the NA_W3 axis (Lane B).
Remove the support pins/Jig from the backup base.
496101 Conveyor Width Automatic Set-up
The initialization is imperfect.
Power on the machine again. The transfer driver has a problem.
496102 Conveyor Width Automatic Set-up
It failed in zeroing operation.
Perform zeroing operation.
496103 Conveyor Width Automatic Set-up
An alarm for the interference is occurring.
-----
496104 Conveyor Width Automatic Set-up
DI was detected.
-----
496105 Conveyor Width Automatic Set-up
The conveyor cover opened.
Close the conveyor cover.
496106 Conveyor Width Automatic Set-up
Voltage reduction on the power source was detected.
Check the transfer driver.
496107 Conveyor Width Automatic Set-up
OT (+) was detected during auto operation.
Perform zeroing operation.
496108 Conveyor Width Automatic Set-up
OT (-) was detected during auto operation.
Perform zeroing operation.
496201 Conveyor Width Automatic Set-up (Input conveyor W2)
The initialization is imperfect.
Power on the machine again. The transfer driver has a problem.
496202 Conveyor Width Automatic Set-up (Input conveyor W2)
It failed in zeroing operation.
Perform zeroing operation.
496203 Conveyor Width Automatic Set-up (Input conveyor W2)
An alarm for the interference is occurring.
-----
496204 Conveyor Width Automatic Set-up (Input conveyor W2)
DI was detected.
-----
496205 Conveyor Width Automatic Set-up (Input conveyor W2)
The conveyor cover opened.
Close the conveyor cover.
496206 Conveyor Width Automatic Set-up (Input conveyor W2)
Voltage reduction on the power source was detected.
Check the transfer driver.
6.9 自動段取り
110
SOM-2079
1005-001
異常 ID 異常名、説明、要因および復帰方法
496207 Conveyor Width Automatic Set-up (Input conveyor W2)
OT (+) was detected during auto operation.
Perform zeroing operation.
496208 Conveyor Width Automatic Set-up (Input conveyor W2)
OT (-) was detected during auto operation.
Perform zeroing operation.
496301 Conveyor Width Automatic Setup (Positioning conveyor W1)
The initialization is imperfect.
Power on the machine again. The transfer driver has a problem.
496302 Conveyor Width Automatic Setup (Positioning conveyor W1)
It failed in zeroing operation.
Perform zeroing operation.
496303 Conveyor Width Automatic Setup (Positioning conveyor W1)
An alarm for the interference is occurring.
-----
496304 Conveyor Width Automatic Setup (Positioning conveyor W1)
DI was detected.
-----
496305 Conveyor Width Automatic Setup (Positioning conveyor W1)
The conveyor cover opened.
Close the conveyor cover.
496306 Conveyor Width Automatic Setup (Positioning conveyor W1)
Voltage reduction on the power source was detected.
Check the transfer driver.
496307 Conveyor Width Automatic Setup (Positioning conveyor W1)
OT (+) was detected during auto operation.
Perform zeroing operation.
496308 Conveyor Width Automatic Setup (Positioning conveyor W1)
OT (-) was detected during auto operation.
Perform zeroing operation.
496401 Conveyor Width Automatic Setup (Positioning conveyor W2)
The initialization is imperfect.
Power on the machine again. The transfer driver has a problem.
496402 Conveyor Width Automatic Setup (Positioning conveyor W2)
It failed in zeroing operation.
Perform zeroing operation.
496403 Conveyor Width Automatic Setup (Positioning conveyor W2)
An alarm for the interference is occurring.
-----
496404 Conveyor Width Automatic Setup (Positioning conveyor W2)
DI was detected.
-----
496405 Conveyor Width Automatic Setup (Positioning conveyor W2)
The conveyor cover opened.
Close the conveyor cover.
6.9 自動段取り
111
SOM-2079
1005-001
異常 ID 異常名、説明、要因および復帰方法
496406 Conveyor Width Automatic Setup (Positioning conveyor W2)
Voltage reduction on the power source was detected.
Check the transfer driver.
496407 Conveyor Width Automatic Setup (Positioning conveyor W2)
OT (+) was detected during auto operation.
Perform zeroing operation.
496408 Conveyor Width Automatic Setup (Positioning conveyor W2)
OT (-) was detected during auto operation.
Perform zeroing operation.
496501 Conveyor Width Automatic Setup (Output conveyor W1)
The initialization is imperfect.
Power on the machine again. The transfer driver has a problem.
496502 Conveyor Width Automatic Setup (Output conveyor W1)
It failed in zeroing operation.
Perform zeroing operation.
496503 Conveyor Width Automatic Setup (Output conveyor W1)
An alarm for the interference is occurring.
-----
496504 Conveyor Width Automatic Setup (Output conveyor W1)
DI was detected.
-----
496505 Conveyor Width Automatic Setup (Output conveyor W1)
The conveyor cover opened.
Close the conveyor cover.
496506 Conveyor Width Automatic Setup (Output conveyor W1)
Voltage reduction on the power source was detected.
Check the transfer driver.
496507 Conveyor Width Automatic Setup (Output conveyor W1)
OT (+) was detected during auto operation.
Perform zeroing operation.
496508 Conveyor Width Automatic Setup (Output conveyor W1)
OT (-) was detected during auto operation.
Perform zeroing operation.
496601 Conveyor Width Automatic Setup (Output conveyor W2)
The initialization is imperfect.
Power on the machine again. The transfer driver has a problem.
496602 Conveyor Width Automatic Setup (Output conveyor W2)
It failed in zeroing operation.
Perform zeroing operation.
496603 Conveyor Width Automatic Setup (Output conveyor W2)
An alarm for the interference is occurring.
-----
496604 Conveyor Width Automatic Setup (Output conveyor W2)
DI was detected.
-----
6.9 自動段取り