200823.TR3000-IRV English Manual.pdf - 第12页
IR AUT O BGA R ework S tation TR3000-IRV Kukjetrading Co., Ltd. 12 4. BGA Rewor k Station Parts ① 24-inch monitor: Displays the video from the vision camera a s a Full HD image. ② 7-inch monitor: Displays the video fr o …
IR AUTO BGA Rework Station TR3000-IRV
Kukjetrading Co., Ltd.
11
IR AUTO BGA Rework Station TR3000-IRV
Kukjetrading Co., Ltd.
12
4. BGA Rework Station Parts
① 24-inch monitor: Displays the video from the vision camera as a Full HD image.
② 7-inch monitor: Displays the video from the right side camera as a Full HD image.
③ Rotation shaft adjustment screw: It can rotate the axis of VACUUM BIT. By turning left/right, you can align
the position of the component on the PCB with the rotation direction of the component. It is rotated in a range
of 45 degrees.
④ Tower lamp: It is a three-color alarm light.
⑤ Controller: This is a touch panel operating system. It can be operated with touch, mouse, or remote control.
⑥ Various terminals, switches and buttons: M4, TK terminal, upper and lower vision light selection switch,
laser pointer, external vacuum pen switch, cooling fan RPM control switch, VISION brightness control switch,
and power button.
⑦ Side camera: photographs the soldering process.
IR AUTO BGA Rework Station TR3000-IRV
Kukjetrading Co., Ltd.
13
⑧ Lower heater: Uses 8 IR heaters. It is divided into 2 blocks, and you can turn on all 8 by pressing the
HEATER2 button on the touch panel.
⑨ Cooling fan: Cools the lower heater and substrate.
⑩ Remote control box: It is connected by USB and performs frequently used functions by pressing a button.
⑪ X-axis fixing screw: Fixes the movement of the table to the X-axis.
⑫ Vacuum indicator: Displays vacuum pressure. The presence or absence of a pick-up miss is detected by a
pressure difference.
⑬ Emergency Stop switch: This is an emergency stop button. Heater power is cut off when button is pressed.
⑭ Upper heater cover & heater: It consists of a cover and reflector to protect the upper heater. Screening plate:
This is the adjusting screw of the screening plate of the upper heater. You can set the heating range by setting
the area of the blanking plate without using a nozzle.
VACUUM BIT: Vacuum adsorption of parts. It can be replaced by size.
⑮ VISION Camera: This is a VISION camera for mounting. The dipping tool is installed on the left side and
the BGA is placed as a parts tray on the right side. Centering is easy by adjusting the width according to the size
of the part.
Ⓐ Bending prevention jig: This is a jig that prevents the PCB from bending downward.