Board-Inverter-Operation-Manual-REV-F-2.pdf - 第7页
BI2000 Boa rd Invert er Manual Revision F / January 2022 Page 7 of 37 Safety 221B Cer tain w arning symbol s are a ffixe d to the mac hine an d corre spond t o notat ions in t his man ual. Be fore ope ra ting th e system…
BI2000 Board Inverter Manual
Revision F / January 2022
Page 6 of 37
Introduction
209BBefore you operate this system, read the operation and setup manual. This will help you to
become familiar with the product and ensure successful operation.
210BIf any questions or problems arise, contact PVA’s Technical Support department.
PVA Contact Information
211BMain Office PVA
6 Corporate Drive
Halfmoon, NY 12065
214BTel +1-518-371-2684
215BFax +1-518-371-2688
216BWebsite: http://www.pva.net
217BEmail: info@pva.net
218BTechnical Support
219BTel +1-844-734-0209
220BEmail: cs@pva.net
Document History
Revision
Revision Date
Reason for Changes
REV F
February 2020
SoftStart Initial Setup Updated
REV E
January 2020
Template updated
REV D
September 2017
Screens updated
REV C
July 2016
Maintenance updated
REV B
June 2016
Template update and chain/conveyer added
REV A
January 2003
Initial release for Unitronics PLC
358BNote: All photographs and CAD model representations in this document are a “general
representation” of the system and its components. The actual appearance of the
system and its components can differ based upon customer specific configuration.
BI2000 Board Inverter Manual
Revision F / January 2022
Page 7 of 37
Safety
221BCertain warning symbols are affixed to the machine and correspond to notations in this
manual. Before operating the system, identify these warning labels and read the notices
described below. Not all labels may be used on any specific system.
Always wear approved safety glasses when you operate or work near the
workcell.
Before you operate the system, read and understand the manuals provided
with the unit.
Never put hands or tools in areas with this symbol when the machine is in
operation. A dangerous condition may exist.
Read and understand the manuals provided with the unit before any repairs
or maintenance is done. Only a qualified individual should do service.
Use caution when there are pressurized vessels. Find and repair any leaks
immediately. Always wear appropriate safety equipment when you work
with pressurized vessels or vessels that contain chemicals
Shear hazard from moving parts. Avoid contact.
Do not remove protective guarding.
In situations where inattention could cause either personal injury or damage
to equipment, a warning notice is used.
BI2000 Board Inverter Manual
Revision F / January 2022
Page 8 of 37
Do not smoke near the PVA UV cure machine. Always have a fire
extinguisher available for emergency use.
Before performing any repairs or maintenance to the system, turn off power
and lock out the power disconnect switch.
Warning notices are used to emphasize that hazardous voltages, current,
temperatures, or other conditions that could cause personal injury exist in
this equipment or may be associated with its use. Only qualified personnel
should enter areas designated with this symbol.
Laser light source present. Do not stare directly into the beam. Do not use in
the presence of highly reflective surfaces
Pinch hazard from moving parts. Avoid contact.
Hot surface. Avoid contact.
Warning, Ultraviolet (UV) light hazard. Do not look directly at the UV light
source.