Board-Inverter-Operation-Manual-REV-F-2.pdf - 第8页
BI2000 Boa rd Invert er Manual Revision F / January 2022 Page 8 of 37 Do not smok e near the PVA UV cure m achine. Al ways have a fir e exti ngui sher avail ab le for emerg ency use. Before p erfor ming a ny r epairs o r…
BI2000 Board Inverter Manual
Revision F / January 2022
Page 7 of 37
Safety
221BCertain warning symbols are affixed to the machine and correspond to notations in this
manual. Before operating the system, identify these warning labels and read the notices
described below. Not all labels may be used on any specific system.
Always wear approved safety glasses when you operate or work near the
workcell.
Before you operate the system, read and understand the manuals provided
with the unit.
Never put hands or tools in areas with this symbol when the machine is in
operation. A dangerous condition may exist.
Read and understand the manuals provided with the unit before any repairs
or maintenance is done. Only a qualified individual should do service.
Use caution when there are pressurized vessels. Find and repair any leaks
immediately. Always wear appropriate safety equipment when you work
with pressurized vessels or vessels that contain chemicals
Shear hazard from moving parts. Avoid contact.
Do not remove protective guarding.
In situations where inattention could cause either personal injury or damage
to equipment, a warning notice is used.
BI2000 Board Inverter Manual
Revision F / January 2022
Page 8 of 37
Do not smoke near the PVA UV cure machine. Always have a fire
extinguisher available for emergency use.
Before performing any repairs or maintenance to the system, turn off power
and lock out the power disconnect switch.
Warning notices are used to emphasize that hazardous voltages, current,
temperatures, or other conditions that could cause personal injury exist in
this equipment or may be associated with its use. Only qualified personnel
should enter areas designated with this symbol.
Laser light source present. Do not stare directly into the beam. Do not use in
the presence of highly reflective surfaces
Pinch hazard from moving parts. Avoid contact.
Hot surface. Avoid contact.
Warning, Ultraviolet (UV) light hazard. Do not look directly at the UV light
source.
BI2000 Board Inverter Manual
Revision F / January 2022
Page 9 of 37
Notices and Warnings
• 77BWear safety glasses, gloves, and long-sleeved clothing when working with
automated industrial equipment.
• 78BRead and understand all operating manuals before using this equipment.
• 79BDo not disable the safety features of the machine.
• 80BLock-out and tag-out the air and power supplies before any service is done.
• 81BReduce the air pressure to 0 psi before any hoses are removed.
• 82BMake sure all replacement parts are correctly rated for use.
• 83BAlways remain clear of all moving parts when the system is in operation.
Personal Protective Equipment
222BOperators must use eye protection because material contents are under pressure. Always
wear gloves when handling materials and solvents. Refer to MSDS sheets on the material
being dispensed for other precautions.
Environmental
Noise Levels
223BThe audible noise level of the board invertor is below 65 dBA.
Materials/Chemicals
224BThere are no dangerous materials or chemicals used in the operation of the machine.
Transportation, Operation, and Storage
Handling and Transportation
225BHandling and transportation should be done with minimal vibration and shock to the
system. An air-ride truck is recommended for roadway transport.
Storage
226BAll enclosures and connector covers should be closed tightly. The system should be
covered if dust or other airborne debris is present in the storage area.