Maintenance (Micron) workbook Iss07.pdf - 第29页
Issue 6, Nov 14 29 Objective ET5: Carry out PCB removal and replacement procedures Using the ESD protective equipment supplied and with the aid of the manual, remove one of each type of card and check for correct configu…
28 Issue 6, Nov 14
Objective ET4.2
With reference to the technical reference manual, identify each part of the Control
Enclosure
NOTES:
X1
X2
X3
X4
X5
X6 X7
X1
X2
X3
X4
X5
X6 X7
Issue 6, Nov 14
29
Objective ET5: Carry out PCB removal and replacement procedures
Using the ESD protective equipment supplied and with the aid of the manual, remove one
of each type of card and check for correct configuration. Replace the card ensuring any
subsequent recovery procedures are carried out.
NOTES:
Quiz:
Which configurations and settings must be completed if the Nextmove card is changed?
Name 3 locations where +24v can be monitored?
Which cards are interchangeable for troubleshooting purposes?
30 Issue 6, Nov 14
Objective ET6: Identify all sensors and switches used on the machine
Using the technical reference manual as a guide, locate each sensor type on the machine.
o
+
-
1314
21
33
34
22
1