SIPLACE S-23 HM.pdf - 第127页
User Manual SIPLACE S-23 HM 3 Introduction and Basic Concepts Software Version SR.406.xx 02/00 US Edition 3.3 User Interface - Views and Menus 127 3 Å Click t he Delete list button if you wan t to del ete all th e entr i…
3 Introduction and Basic Concepts User Manual SIPLACE S-23 HM
3.3 User Interface - Views and Menus Software Version SR.406.xx 02/00 US Edition
126
Cluster for fine calibration... 3
In the "Stand alone" control mode, you can use this menu item to load the data of a selected
cluster (placement program) from the station computer’s hard disk. 3
NOTE
The data for the cluster selected in the box is designed for the assembly of special glass compo-
nents on a glass PCB. The assembled glass PCB is then used for fine calibration in conjunction
with the SITEST test program. 3
Å Click the menu item Cluster for fine calibration...
Å In the box which is now displayed, select the entry corresponding to the required cluster and
click OK to confirm your selection.
The cluster data is now loaded.
GEM-Defaults ... 3
You use this item to specify the GEM parameters which are used as the default parameters when
the station is switched on. 3
Å Click the menu item GEM-Defaults ...
The window in which you set the GEM default parameters is now opened.
For a detailed description, refer to Chapter 12.
PCB barcode ... 3
You use this item to display a dialog box with a list of the barcodes most recently read by the PCB
barcode reader.
This dialog box also informs you if an error occurred while reading the barcode, if the file format
is incorrect or if no data is available. 3
NOTE
You cannot call the menu item "PCB barcode ..." unless the PCB barcode reader has been
installed in the machine and has been activated in the machine options. 3
Å Click the menu item PCB barcode ...
The "PCB barcode" dialog box is opened.
User Manual SIPLACE S-23 HM 3 Introduction and Basic Concepts
Software Version SR.406.xx 02/00 US Edition 3.3 User Interface - Views and Menus
127
3
Å Click the Delete list button if you want to delete all the entries in the list.
Å Click the Close button to close the dialog box.
NOTE
The current status of barcode operation is displayed below the "Delete list" button. Barcode
operation is activated or deactivated in the LC program. 3
3.3.2.4 "Language" Menu
You can use the "Language" menu to select between the language versions which are integrated
in the SC software.
You can chose between the languages "German", "English", "French", "Italian", "Spanish", "Portu-
guese", "Hungarian", "Czech", "Russian", "Simplified Chinese", "Traditional Chinese", "Korean"
and "Japanese". 3
Å Click the menu item corresponding to the required language.
The user interface texts are displayed in the selected language.
3
3 Introduction and Basic Concepts User Manual SIPLACE S-23 HM
3.3 User Interface - Views and Menus Software Version SR.406.xx 02/00 US Edition
128
3.3.2.5 "Help" Menu
This menu gives you access to all the functions required to call the help system and general infor-
mation concerning the station computer or the software. 3
Content Ctrl+F1 3
This calls on-line help. 3
Help Alt+F1 3
Help information relating to the current view is displayed. 3
Use help 3
Information on how to use Help is displayed. 3
Info ... 3
This displays information on the currently installed software version (SC , MC, WPC, GEM
version) together with general information on the station computer. 3
NOTE
You can use the key combination CTRL+F1 to call the on-line Help function from within any view
in the user interface.
You can use the key combination Alt+F1 to call up help on the current view and the key combi-
nation Shift+F1 to access help on menu items, icons and buttons.
For a detailed description of the functions in the Help menu, refer to Chapter 9. 3
Å Click the required menu item in the "Help" menu or press the corresponding key combination.
3