SIPLACE S-23 HM.pdf - 第131页

User Manual SIPLAC E S-23 HM 4 Placement Functions Software Version SR.406.xx 02/00 US Edition 4.1 Setup Display 131 – CO-BC This colum n shows wh ether or not a com ponent b arcode h as been s pecifie d for the c orre- …

4 Placement Functions User Manual SIPLACE S-23 HM

4.1 Setup Display Software Version SR.406.xx 02/00 US Edition

130

4.1.1 "Setup location x" View

Å Click on the icon in the toolbar in the Main view.

The user interface switches to the "Setup location x" view.

The setup data for the current location is presented in the display area in tabular form.

NOTE

The view is the same for each location. 4

4.1.1.1 Meaning of the Entries in the Setup Table

– Loc.

The number of the location whose setup is to be displayed is entered in this column. (See

Chapter 3, Fig. 3.1 - 2 for the position of the locations)

– Track

The number of the track on which the corresponding feeder is located is entered here.

– Div.

The number of the feeder division from which the component in the corresponding feeder is to

be picked is entered in this column.

NOTE

The number for a tray division can also be entered here for other types of machines in the

SIPLACE series. 4

– Tray

This column is irrelevant when setting up the locations of a SIPLACE S-23 HM.

(Only valid for automatic placement machines with wafflepack changers).

– CmpName

The name of the corresponding component is entered in this column.

– GF no.

The number of the package form for the corresponding component is entered here.

– Track barc.

The track barcode assigned to the corresponding track is entered in this column.

User Manual SIPLACE S-23 HM 4 Placement Functions

Software Version SR.406.xx 02/00 US Edition 4.1 Setup Display

131

– CO-BC

This column shows whether or not a component barcode has been specified for the corre-

sponding component in the setup using the "***" or "-" symbol.

*** A barcode is specified for the component.

The "Comp. verification with barcode ..." button is active when you click

on these lines in the table (see Section 4.1.2). 4

- No barcode is specified for the component.

(The "Comp. verification with barcode ..." button is not active). 4

4.1.2 Component Verification With Barcode

You prevent a track from being refilled with the wrong components with this function when refilling

components with a specified component barcode.

The operator reads the track barcode and then the component barcode with the barcode reader

(see Chapter 12) . The two barcode assignments are compared with the help of the SC software.

Incorrect assignments are not accepted. 4

Requirements

– The barcode reader must be connected to the station computer.

– The "Track BC" option must be activated on the line computer (in the configuration editor) for

the corresponding station. (Only then will the "Component verification with barcode" option be

displayed in the machine options on the station computer).

– The barcodes for the corresponding components must have been entered on the line computer

with the help of the component editor.

(A maximum of 6 different barcodes can be entered for a component at the present time).

– The "Component verification with barcode" option must be active in the machine options.

Procedure

Å Open th e Options menu in the Main view and click on the Machine options ... menu option.

The "Machine options" window is opened (see Chapter 3).

Å Activate the checkbox for "Component verification with barcode".

Å Click on Apply. The window closes.

Å Switch the user interface to the "Setup location x" view.

Å Click on the icon in the toolbar for the desired location (see Fig. 4.1 - 1).

4 Placement Functions User Manual SIPLACE S-23 HM

4.1 Setup Display Software Version SR.406.xx 02/00 US Edition

132

Å Select the entry in the setup table for the track for which you want to execute a component ver-

ification (or read the track barcode on the barcode bar using the barcode reader). The line se-

lected is highlighted in light blue in the table.

Å Click on the Comp. verification with barcode ... button

The following window is opened. The data for the selected track is displayed so you can check

the data.

Fig. 4.1 - 2 "Component verification with barcode" window

Å Read the component barcode in from the corresponding component reel with the

barcode reader. The barcode read in is displayed in the "Barcode:" line (see Section 4.1.2.1).

NOTE

If the component barcode cannot be read in, then enter it manually. The procedure is

described in Section 4.1.2.1. 4