SIPLACE S-23 HM.pdf - 第50页

1 Introduction, technical data User M anual SIPLACE S -23 HM 1.15 Overview of the modules - PCB conveyor Software Version SR.406.xx 02/00 US E dition 50 The conv eyor be lts are driven by DC moto rs. The liftin g table n…

User Manual SIPLACE S-23 HM 1 Introduction, technical data

Software Version SR.406.xx 02/00 US Edition 1.15 Overview of the modules - PCB conveyor

1.15 Overview of the modules - PCB conveyor

1.15.1 Structure of the PCB conveyor

The placement system is supplied with a single conveyor as standard. A dual conveyor is avail-

able as an option. 1

The left or the right side of the PCB conveyor can be used as the stationary side, as required. 1

Fig. 1.15 - 1 PCB transport - single conveyor

(1) Input conveyor (2) Center conveyor

(3) Output conveyor (4) Lifting table

(5) Width adjustment T Direction of PCB transport 1

1 Introduction, technical data User Manual SIPLACE S-23 HM

1.15 Overview of the modules - PCB conveyor Software Version SR.406.xx 02/00 US Edition

The conveyor belts are driven by DC motors. The lifting table near the center conveyor clamps the

PCBs in position. The width of the PCB conveyor can be adjusted either 1

– via the menu or

– using the line computer.

1.15.2 Technical data – single conveyor

1.15.3 Technical data – dual conveyor

PCB format 50mm x 50mm to 460mm x 460mm

2" x 2" to 18" x 18"

Optionally: up to 508mm x 460mm

up to 20" x 18 "

PCB thickness 0.5mm to 4.5mm

Max. PCB warpage On top: 4.5mm - PCB thickness

On bottom: 0.5mm + PCB thickness

Clearance on PCB underside 25mm (standard), 40mm (option)

PCB transport height 830mm ± 15mm (standard)

900mm ± 15mm (option)

930mm ± 15mm (option)

950mm ± 15mm (SMEMA: optional)

Fixed conveyor edge Right (standard), left (optional)

Type of interface Siemens (standard), (SMEMA: optional)

Component-free handling edge 3mm

PCB changeover time 2.5 s

PCB format 50mm x 50mm to 460mm x 216mm

2" x 2" to 18" x 8.5"

Optionally: up to 508mm x 216mm

up to 20" x 8.5 "