SIPLACE S-23 HM.pdf - 第23页
User Manual SIPLAC E S-23 HM 1 Introduction, technical dat a Software Version S R.406.xx 02/00 US E dition 1.3 User classification 23 Line engineers 1 Line engi neers have u nderg one speci al train ing and ar e authoriz…
1 Introduction, technical data User Manual SIPLACE S-23 HM
1.3 User classification Software Version SR.406.xx 02/00 US Edition
22
Error information and diagnostics 1
This chapter contains basic instructions on how to use the information provided by the error diag-
nosis system, which also enables you to enter and save your own notes on errors that have oc-
curred. The menu-driven diagnosis system is a valuable aid to trouble-shooting and error
analysis. 1
On-line help 1
This chapter explains how to use the on-line help system. 1
Component handling 1
In this chapter you will find information concerning the feeder modules and the components they
can be used to insert. 1
Station extensions hardware/software 1
Overviews of the nozzle changers, PCB barcode readers, Remote Service, etc. 1
Software installation 1
This chapter tells you how to install the software. 1
1.3 User classification
The operating software is structured so that certain functions or menus can only by used or called
by appropriately trained personnel. There are three different classes of user: 1
– operators,
– line engineers and
– service engineers.
Access to each class may be password-protected. Chapters containing information for user
classes higher than "operator" contain a reference to the user class concerned in the footer. 1
Operators 1
The operator class consists of any person who has been trained in operation of the machine.
These people are authorized to use any functions associated with operating the machine and may
call up any menus needed to use the machine. 1
User Manual SIPLACE S-23 HM 1 Introduction, technical data
Software Version SR.406.xx 02/00 US Edition 1.3 User classification
23
Line engineers 1
Line engineers have undergone special training and are authorized to carry out line engineer ac-
tivities, such as creating set-up configurations, determining vision parameters, etc. 1
Service engineers 1
This class is reserved for Siemens engineers, who are trained to carry out servicing work and to
upgrade and retrofit the placement system. 1
WARNING
A thorough knowledge of the relevant part of this User Manual is re-
quired before carrying out any work on the machine. All work must be carried out by appropriately
trained and qualified personnel. All warning, caution and danger notes MUST be observed. 1
PLEASE NOTE: The content of this User Manual is not part of or intended to modify a previous
or existing agreement, undertaking or legal relationship. Any undertakings entered into by Sie-
mens AG result from the purchase contract, which also contains complete and generally applica-
ble guarantees. Such contractual guarantee provisions are neither extended nor restricted by the
information given in this User Manual. 1
1 Introduction, technical data User Manual SIPLACE S-23 HM
1.4 Revision index Software Version SR.406.xx 02/00 US Edition
24
1.4 Revision index
1
1.4.1 Overview of the revisions in the 02/00 edition
1
Manual Software version Issue
First draft S-23 HM Provisional User Manual 405 01/99
Revision S-23 HM User Manual 405 05/99
Revision S-23 HM User Manual 406 02/00
New or modified Chapter/Section
6,3/$&(RQWKH:RUOG:LGH:HE::: 1.1.1
Safety instructions for the PCB barcode reader (option) 2.1.7
Safety instructions for coupling and uncoupling the mobile
changeover table
2.1.8
Safety instructions for changing the height of component tables 2.1.9
Safety instructions for the changeable component feeder table 2.1.10
"Mode" Menu 3.3.2.1
"Language" Menu 3.3.2.4
What should you do ... 7
Copying a help file 9.1.2.1
3 x 8 mm S module 10.2.2
3 x 8 mm S module for 0201/0402 components 10.2.3
PCB barcode 11.4
Ceramic substrate centering 11.5
Fine calibration 11.8