00196806-02_IM_EDM_1_10_en.pdf - 第23页
EDM V1.10 / Installation Manual 07/2011 Edition 4.3.5 Finishing the installation Preparation for the installa tion is now complete, the files for SIPLACE EDM can be co pied and the configuration can be carri ed out. The …
EDM V1.10 / Installation Manual 07/2011 Edition
Figure 4-9: EDM database options
If a compatible EDM database has already been read in, this is taken over and converted to the
current version. Otherwise you are asked whether you want to replace the database or select a
different server.
► Confirm your selection with Next.
22
EDM V1.10 / Installation Manual 07/2011 Edition
4.3.5 Finishing the installation
Preparation for the installation is now complete, the files for SIPLACE EDM can be copied and the
configuration can be carried out. The screen below shows a summary of the activities that need to
be carried out for installing a Master Server.
Figure 4-10: Finishing the installation
23
EDM V1.10 / Installation Manual 07/2011 Edition
4.4 Upgrading from a previous version
4.4.1 Conditions / downward compatibility
Installing different versions of EDM on Master and Client should be avoided. If different versions of
SIPLACE Pro are used on the EDM Master and the EDM lines, some restrictions apply because
the format of the data transferred depends on the SIPLACE Pro version used. During an upgrade,
the Master Server, all Line Servers and all Clearing Pools must therefore be converted to EDM
1.10 (and thus to SIPLACE Pro 9.3).
EDM 1.10 can use all templates which were created for EDM 1.1 or later, as well as custom
workflows from EDM 1.1 or later.
Existing filter settings are retained and updated, but it is recommended that you manually inspect
the converted file (it may be that your own custom changes have been superseded by
improvements to the default configuration).
4.4.2 Simultaneous upgrade over all lines
Where possible, production on all the lines to be upgraded should be suspended for the duration of
the upgrade. As soon as all the components have been converted, production can be restarted.
The upgrade operation is carried out as follows:
1. Interrupt production on all the lines to be upgraded.
2. Transfer all notifications from the Line Servers to the Master Server.
3. Accept/reject all notifications in the Clearing Pool.
4. Close all EDM applications.
5. Install SIPLACE Pro and than EDM Line Server on all lines.
6. Install SIPLACE Pro and then the EDM Master Server on the Master Server.
CAUTION
To avoid all notifications still in the Clearing Pool from being lost, the EDM database
must not be deleted.
7. Resume production.
Simultaneous upgrade across all the lines is to be preferred to a gradual upgrade of individual lines
(insofar as this is possible).
4.4.3 Gradual upgrade of individual lines / compatibility mode
If it is not possible to perform a simultaneous upgrade across all the lines, EDM provides a
compatibility mode which permits restricted operation of an EDM 1.7 Line Server in conjunction
with a Master Server from an earlier version (as of EDM 1.4) for the duration of the upgrade.
CAUTION
This compatibility mode must not be used for long-term mixed operation of an EDM 1.7
Line Server with a Master Server from an earlier version of EDM.
24