00196806-02_IM_EDM_1_10_en.pdf - 第42页

EDM V1.10 / Installation Manual 07/2011 Edition 5.2.4 Configuring push mode Push mode provides a large number of settings that allow EDM to be tailored to the need s of the customer. 5.2.4.1 General settings Setting Defa…

EDM V1.10 / Installation Manual 07/2011 Edition

useVdmBlobExtension (false) - deprecated

If true: Activates EDM BLOB handling. This option should only be activated if this

is necessary for reasons of compatibility. It is recommended that you leave this

value set to "false" and use EDM BLOB handling.

If this option is activated, EDM BLOB handling must be deactivated with the entry

<add key="UseBlobExtension" value="false"/>.

CompatibilityMode (false)

If true: Allows restricted operation of an EDM Line Server together with an EDM

1.1 Master Server.

Caution: This mode must not be used for long-term mixed operation, but only for

gradual line-by-line upgrading of the EDM system (see section 4.4 Upgrading from

a previous version).

doNotUseDefaultCategoryInCommentDialog (false)

doNotUseDefaultUserInCommentDialog (false)

doNotUseDefaultCommentInCommentDialog (false)

If true: Does not enter default values into the relevant field (category, user name

or comment) when the dialog box for entering a comment for a notification is

opened. This means that the contents must be entered manually each time.

forceUserEntryInCommentDialog (false)

forceCommentEntryInCommentDialog (false)

forceCategoryEntryInCommentDialog (false)

If true: Forces the user to make an entry in the relevant field (category, user

name or comment) in the dialog box for entering a comment for a notification.

Empty entries are no longer accepted.

EdeUserControlOverride

This class name specifies the control used in place of the Extended Difference

Editor.

CompressionHelper.ZipCompressionLevel (9)

Integer 0 through 9.

Compression rate for data transfer. Specifies the compression level of the

algorithm used. A lower compression rate can be required if memory problems

arise as a result of large volumes of data during compression.

setUserInCommentDialogTo

Possible values: "[SiplaceProUserName]", "[WindowsUserName]" or any

text.

On an EDM Client, specifies the value used to preset the User field in the

confirmation dialog box of the EDM Client.

disableUserEntryInCommentDialog (false)

If this option is enabled, users of the confirmation dialog box on the EDM Client

cannot change the predefined user name. The name selected in

setUserInCommentDialogTo is used.

EDM V1.10 / Installation Manual 07/2011 Edition

5.2.4 Configuring push mode

Push mode provides a large number of settings that allow EDM to be tailored to the needs of the

customer.

5.2.4.1 General settings

Setting Default Valid

for

Explanation

EnablePushMode false ALL Activates push mode. This setting

must be enabled on all EDM

computers (EDM Master, EDM

Client and EDM Clearing Pool) that

are to participate in push mode.

Table 5-4: General settings

5.2.4.2 Automatic push in the Clearing Pool

Auto Push can maintain the consistency of the data if a line engineer on an EDM Client makes

changes to an object that are rejected in the Clearing Pool. In this event, the version of the object in

the EDM Master can be automatically transferred to the line. This means that the object on the line

that is invalid from the perspective of the data preparation engineer is replaced by the copy in the

Clearing Pool.

Setting Default Valid

for

Explanation

ClearingPool.AutomaticPush.Enabled false Clearing

pool

Activates Auto Push at the

Clearing Pool.

ClearingPool.AutomaticPush.

RequireConfirmation

true Clearing

pool

Specifies whether the Clearing

Pool should show a confirmation

dialog box on every Auto Push.

Table 5-5: Settings for Auto Push

EDM V1.10 / Installation Manual 07/2011 Edition

5.2.4.3 User guidance on the EDM Client

These parameters specify how the various push operations are presented to the user at the EDM

Client.

Setting Default Valid for Explanation

ConfirmAtLineServer true Data

Transfer

Manager

If set to "true", a confirmation

dialog box is displayed on the EDM

line for the push operations to be

imported. Otherwise, the import is

executed immediately, depending

on the settings described in 0

If Operator

MayOverride.

dual push

ConfirmAtLineServer is

enabled, this setting acts as th

default value and can be

overwritten for each indivi

operation in the Data Transfer

Manager.

AllowReject false Data

fer

hether the line engineer

ride.AllowR

Trans

Manager

Specifies w

is permitted to reject the push

operation (or is forced to impor

pushed objects). If

OperatorMayOver

eject is enabled, this setting acts

as the default value and can be

overwritten for each individual pu

operation in the Data Transfer

Manager.

AllowDelay true Data

fer

hether the line engineer

the

Trans

Manager

Specifies w

is allowed to delay a push.

Delaying causes the GUI on

EDM line to be minimized for a

time to that work on the EDM lin

is not obstructed.

If OperatorMayOverride.

AllowDelay is enabled, this

setting acts as the default value

and can be overwritten for each

individual push operation in the

Data Transfer Manager.

OperatorMayOverride.AllowDelay false Data

fer

rridden in

Trans

Manager

AllowDelay can be ove

the Data Transfer Manager.

OperatorMayOverride.AllowReject false

fer

AllowReject can be overridden Data

Trans

Manager

in the Data Transfer Manager.

OperatorMayOverride.ConfirmAtLine false

fer

ConfirmAtLineServer can be

Server

Data

Trans

Manager

overridden in the Data Transfer

Manager.

Table 5-6: Settings for user guidance