00196806-02_IM_EDM_1_10_en.pdf - 第36页
EDM V1.10 / Installation Manual 07/2011 Edition 5.2.3.18 Modified object protection Key: useModifiedObjectProtection Type: String ( true / false ) Default: true Valid for: Line server Description: Activation/deactivation…
EDM V1.10 / Installation Manual 07/2011 Edition
5.2.3.15 Endpoint configuration
Key: endpointConfig
Type: Section
Valid for: Master server
Description: This section contains pairs of values of the form:
<add key="[hostname]" value="[Endpoint]"/>
There is one pair of such values for each Line Server. This list describes the
connections from the Master Server to the Line Servers to be used.
The network ID (not the alias) of the computer concerned must be entered under
hostname. You can also enter "*" or "all" as the value for hostname. This is
then used as the default value when no entry can be found for a specific Line
Server.
Important: All Line Servers should always be listed in every configuration file. In
particular, the name of the local computer must be included (or at least an entry for
"*").
5.2.3.16 Communication timeout
Key: communicationTimeout
Type: Time
Default: P0Y0M0DT0H1M0S (= 1 minute)
Valid for: Line server
Master server
Clearing pool
Description: Time period in which a message must be received from a particular communication
partner. The setting should generally not be changed. The other options are as
follows (from left to right):
Y = years
M = months
D = days
H = hours
M = minutes
S = seconds
5.2.3.17 Use advanced EDM notification filtering
Key: useAdvancedNotificationFiltering
Type: String (true/false)
Default: true
Valid for: Master server
Description: Activation/deactivation of direct import/rejection of notifications by the Master
Server.
If these filters are deactivated, all notifications are entered in the Clearing Pool. If
they are activated, changes to objects can be accepted/rejected without first being
displayed in the Clearing Pool (for configuration, see section 5.4.3 Direct import of
changed objects to the master database and section 5.4.4 Automatic rejection of
the changes).
35
EDM V1.10 / Installation Manual 07/2011 Edition
5.2.3.18 Modified object protection
Key: useModifiedObjectProtection
Type: String (true/false)
Default: true
Valid for: Line server
Description: Activation/deactivation of the overwriting of modified objects in the Line Server.
If this object is activated, objects which are currently in the Clearing Pool are not
overwritten with the (older) data from the Master Server during a pull operation.
5.2.3.19 Response timeout
Key: responseTimeout
Type: Time
Default: P0Y0M0DT0H5M0S (= 5 minutes)
Valid for: Line server
Description: Time period in which the Line Server considers a reply to a service request from
the Master Server to be valid. Timing problems can arise here due to the
interaction between SIPLACE Pro and XML Import/Export that may require a
change to be made. However, the timeout should not be set to a value too high
since this can cause the users to become very irritated.
The other options are as follows (from left to right):
Y = years
M = months
D = days
H = hours
M = minutes
S = seconds
5.2.3.20 Compression type and level
Key: compressionType
Type: Enum
Values: None
Zip
Bzip
Default: Zip
Valid for: Line server
Master server
Clearing pool
Description: Compression mode for the data transfer. The setting must be identical throughout
the entire system.
The default setting represents a good compromise between the compression ratio
and processing time. If extremely large amounts of data are transferred by the
customer, it may be necessary to set the compression to Bzip. This method offers
a much higher compression ratio than Zip, but at the cost of longer processing
times. Compression should only be switched off when the amount of data is always
very small (< 4MB).
36
EDM V1.10 / Installation Manual 07/2011 Edition
5.2.3.21 Client workflow configuration
Key: clientWorkflowConfig
Type: File
Default: Clientworkflowconfig.xml
Valid for: Line server
Description: Definition of the workflow on the EDM Client. The file name is specified relative to
the configuration folder.
5.2.3.22 Service remoting endpoint
Key: serviceRemotingEndpoint
Type: String
Valid for: Line server
Description: .NET remoting endpoint for communication between the EDM Client and EDM Line
Server. The entry has the format:
[servername]:[tcpport]/EdmService
5.2.3.23 Application template storage
Key: templateStorage
Type: Path
Default: [AppDir]\templateStorage
Valid for: Line server
Master server
Description: Storage location for application templates. The path can be specified absolutely or
relative to the EDM installation folder.
5.2.3.24 Assigned SIPLACE Pro lines
Key: spiLines
Type: Section
Valid for: Line server
Description: Contains the SIPLACE Pro lines assigned to the Line Server. This entry is used for
the EDM VDM BLOB extension and for functions in push mode.
The entries have the format <line path="path"/>, where "path" is the
unqualified full path of the line.
If a path is set to "[ALL]", every line in the EDM Client’s SIPLACE Pro instance is
considered to be assigned to the line server.
One <line> entry with the special value of "[NONE]" deletes the assignments:
the EDM Client is not considered to be assigned to any SIPLACE Pro line.
Important notice: The special values are case sensitive; do not use them as line
object names in SIPLACE Pro!
37