KE-3010A_SPE_EN.pdf - 第50页
- 45 - (5) IS Lite : P rod uction m anagem ent s y stem Juki software, the IS, has been si mplified to develop the IS Lite. This so ftware consolidates and optimizes information on JUKI mounters allocated on the whol e a…
- 44 -
5.2.27. Multi-code Reader / Bottom view type Multi-code Reader (Factory-Set
Option)
This is an option that reads a PWB code (Barcode or 2-D code) with one sensor. It is to
be used with the IFS-NX software and so.
Attach a multi-code reader on the head section to read a code on the surface of a board.
Attach a bottom view multi-code reader on the conveyor (under the IN buffer board
waiting position) to read a code on the bottom side of a board.
Note: A multi-code reader/Bottom view type multi-code reader does not support a
placement monitor.
5.2.28. Software to support production (Option)
(1) EPU (External Programming Unit)
This is software for creating a production program for KE-3000 series on a personal
computer (PC). The screen displayed on a PC is exactly same as that of the machine.
Even while a machine is running productions, you can edit a production program and
manage a database on a PC with this software.
(2) Flexline CAD
With this software you can convert text data files in ASCII format and production
programs created with a CAD system for other manufacture’s machines to the JUKI
format. This permits reducing the production program creating time and transferring
data smoothly from the line of another company.
*
For
detailed information on converting data from other manufacture’s machine,
please contact JUKI or the representative office in your area.
(3) IS (Intelligent Shopfloor Solutions) : Production support system
In addition to the functions of HLC and SCS, IS allows you to obtain information on the
whole shop floor to optimize and manage the production collectively. This
comprehensive management system supports you to reduce cost, and to improve
productivity and product quality effectively. The ”Board viewer” function is equipped as
a standard feature. Also a production plan for a whole shop floor can be created.
*
For
details of IS, refer to “IS PRODUCT SPECIFICATIONS”.
(4) IFS-NX (Intelligent Feeder System) : Production management system
IFS-NX can use alone a software without the production support system.
It uses barcodes, 2-D codes and a multi-code reader to perform quality control
operations such as “prevention of a component placement error” and “traceability,”
“improve the workability of preparations” and “manage the number of the remaining
components.”
To authenticate a feeder or a tray supply unit, you can select a barcode or an RFID.
When you use a component supply unit that supports an RFID, operation such as
verification and management can be automated, so that the quality control and
working efficiency are improved drastically.
* To use a function of IFS-NX, all of a mounter main unit, a feeder change trolley, eac
h
t
ype of feeder, and a tray supply unit have to support an RFID. If you use any
conventional device, contact our Sales staff.
* Refer to the “IFS-NX PRODUCT SPECIFICATIONS” for details of the IFS-NX.
- 45 -
(5) IS Lite : Production management system
Juki software, the IS, has been simplified to develop the IS Lite. This software
consolidates and optimizes information on JUKI mounters allocated on the whole a
line (production site) to improve productivity and to reduce production cost of each
line.
Applicable models : RX-6 series, RX-7, KE-3000
series, FX-3 series,
KE-2070/80 series, KE-2050/60 series
(6) JaNets : Production support system
As with our software IS and IS Lite, This software consolidates and optimizes
information on JUKI mounters allocated on the several lines (production site) to
improve productivity and production quality and to reduce production cost of each line.
Applicable models : RS-1, RX-7, RX-6 series, KE-3000
series, FX-3 series,
KE-2070/80 series, KE-2050/60 series, KD-2077
* For
line configuration that the RS-1 is located, JaNets is required.
- 46 -
6.
Component supply unit
6.1. List of Feeder Bank Specifications
A bank is selected from four types shown below, which supplies components.
It is possible to combine with a front bank and/or a rear bank according to your usage.
Bank type Attachable feeder type
Attachable feeder change
trolley
①
Mechanical feeder bank (fixed
type)
Mechanical feeder
-
②
Electric feeder bank (fixed type) Electric feeder
-
③
Mechanical feeder bank feeder
change trolley type
Mechanical feeder
Mechanical feeder change
trolley only
④
Electric feeder bank feeder
change trolley type
Electric feeder
Electric feeder change trolley
only
⑤
Mechanical/electric combined
feeder bank
(EN machine for a large-sized
board: supported only if it is
designed to use a feeder
exchange trolley.)
Mechanical feeder
Electric feeder
Mechanical feeder change
trolley
Electric feeder change trolley
* C
ompatibility of the electric feeder bank of our mounter KE-3020/3020R
For setting the electric trolley for this model in KE-3020/20R, a modification kit is required
depending on conditions.
- When there is a cutter unit in KE-3020/3020R
→ A modification kit is required.
- When there is no cutter unit in KE-3020/3020R
→ A modification kit is not required.
For
setting the change trolley of KE-3020/20R in this model, no modification kit is
required.