KE-3010A_SPE_EN.pdf - 第70页

- 65 - (2) MTC specif ication Model TR6SN V TR6DN V Method for supplyin g a mount er Supplying c omponen ts by a shut tle Applicable b ank sp e cif icat ion - T ray unit (*1)(*2)(*3)(*4) Number of unit s 20 30 （ 15×2 ） S…

- 64 -

6.7.2. Correspondence table for the TR series

Model KE-3010A/3020VA/3020VRA

Board specifications M,L XL

MTS

TR5SNX ○ ○

TR5DNX

○ ○

TR7DN ○ ○

MTC TR6SNX

- -

TR6SNV ○ -

TR6DNX

- -

TR6DNV ○ -

6.7.3. Specifications

(1) MTS specification

Model

TR5SNX

TR5DNX

TR7DN

Method for supplying a mounter

Direct supply from the tray

Applicable bank specification

For Feeder change trolley

Tray unit

(*1)(*2)(*3)

(*4)(*8)

Size of a tray that

can be supplied

Width: 150mm～340mm

Length:90mm～

230mm

Thickness: 5mm

～

23mm

Mass (*6)

500 g or less/tray

(Total of the mass of a tray and that of a component(s))

Component size

Maximum

□

74 mm and 50 x 150 mm

Mass

217kg (Standard)

220kg (EN)

287kg (Standard)

290kg (EN)

310kg (Standard)

320kg (EN)

Occupied position

Voltage of the power supply

Single-phase 200､220､240､380､400､415 V AC

(supply from the mounter side)

Apparent power

800VA

600VA

1.0kVA

Air consumption (normal)

3L/min

5L/min

6L/min

RFID option (*7)

Applicable

- 65 -

(2) MTC specification

Model

TR6SNV

TR6DNV

Method for supplying a mounter

Supplying components by a shuttle

Applicable bank specification

Tray unit

(*1)(*2)(*3)(*4)

Number of units 20 30（15×2）

Size of a tray that can be

supplied

Width: 150mm to 340mm

Length: 90mm to 230mm

Thickness: 5mm to 15mm

Mass(*6)

500g or less / tray

(Total of mass of a tray and that of a component(s))

Component size(*5) □5mm to □50mm

Mass

226kg (Standard: TR6SNV)

231kg (EN: TR6SNV)

325kg (Standard: TR6DNV)

331kg (EN: TR6DNV)

Pick up pad

2 types: φ11mm and φ4.8mm

Length of the transportation rails

840mm(L)

Voltage of the power supply

Single-phase 200, 220, 240, 380, 400, and 415 V AC (supply

from the mounter side)

Apparent power

900VA

1kVA

Air consumption (normal)

50 L/min

RFID option(*7)

Applicable

(3) DTS specification

Model

TR1SNR

TR1EB

Method for supplying a mounter

Direct supply from the tray

Applicable bank specification

Mechanical bank

Electric bank (*9)

Tray unit[

(*1)(*2)(*3)

Size of a tray that can be

supplied

Width: 150mm～340mm

Length: 90mm～230mm

Thickness: 5mm～27mm

Mass 500g or less / tray

(Total of mass of a tray and that of a component(s))

Component size

Maximum□74mm、50×150mm

Mass

16kg

19kg

Occupied position

Operating voltage

DC 24V±10%

RFID option(*7)

Applicable

- 66 -

(*1) The following types of tray units (tray bases) on which trays can be set are provided:

Model

Type of a tray unit

Description

DTS

Top plate (ST)

assembly

Top plate on which one tray can be set. (Standard)

Top plate (MTX)

assembly

Top plate on which two or more trays can be set. (Option)

MTS

(TR5SNX/5DNX/7DN)

MTC

Tray unit (ST)

One-touch style of holder unit that

pushes down a tray with its spring

pressure.

A tray can be replaced with another

one easily. (Standard)

When the soft material trays

are used a fixed holder unit

can be replaced from Tray unit

(ST). (Option)

Tray unit (A)

Unit that fixes a tray with screws.

It is appropriate for a tray whose material is soft. (Option)

(*2) When you use a DTS and a tope plate (MTX) assembly, the minimum size is 65 mm (W)

× 65 mm (L). When you use a MTS/MTC and an optional waffle tray holder, the

minimum size is 50 mm (W) × 50 mm (L).

(*3) The thickness is a dimension from the bottom of a tray to the top of the tray or a

component, which is higher. When you use a tray whose thickness is more than 11 mm

with a DTS/MTS, you have to set the feeder float sensor of the mounter so that it cannot

be used.

(*4) When you use a tray whose thickness is more than 9 mm with a MTS or TR6DNV, you

cannot set any tray immediately above that tray.

(*5) The area of a component that can be picked up should be □5 mm or more. For a

mechanically chuck component such as a BGA, this area should be □17 mm to □50

mm.

When the CSP chuck (option) is installed, the mechanical chuck component is □9

mm to

□43 mm.

(*6) This is the mass when the device is equipped with full options.

(*7) For the use of the RFID system, the RFID tray bases are required.

Note that the RFID tray bases cannot be shared among the different types of the devices.

The RFID system is a factory-set option. For further information on installing the RFID

option, please contact JUKI or the representative office in your area.

RFID tray base

Representative applicable model Model with compatibility

TR5SNX TR5DNX,TR5SNR,TR5DNR

TR6SNV TR6SNR TR6SNX

TR6DNV TR6DNR TR6SNX

* The standard tray base can be used for all the models mentioned above.

(*8) The tray unit for TR7DN has no compatibility with the existing machine models.

(*9) It does not correspond to the Feeder exchange trolley RF.