KE-3010A_SPE_EN.pdf - 第52页

- 47 - 6.2. Maximum Number of Fe eders Availabl e on a M ounter (1) M echanical feeders N ame The number of feeders avail able on the front side The number of feeder s available o n the rear si de T otal number of feeder…

100%1 / 81
- 46 -
6.
Component supply unit
6.1. List of Feeder Bank Specifications
A bank is selected from four types shown below, which supplies components.
It is possible to combine with a front bank and/or a rear bank according to your usage.
Bank type Attachable feeder type
Attachable feeder change
trolley
①
Mechanical feeder bank (fixed
type)
Mechanical feeder
-
②
Electric feeder bank (fixed type) Electric feeder
-
③
Mechanical feeder bank feeder
change trolley type
Mechanical feeder
Mechanical feeder change
trolley only
④
Electric feeder bank feeder
change trolley type
Electric feeder
Electric feeder change trolley
only
⑤
Mechanical/electric combined
feeder bank
(EN machine for a large-sized
board: supported only if it is
designed to use a feeder
exchange trolley.)
Mechanical feeder
Electric feeder
Mechanical feeder change
trolley
Electric feeder change trolley
* C
ompatibility of the electric feeder bank of our mounter KE-3020/3020R
For setting the electric trolley for this model in KE-3020/20R, a modification kit is required
depending on conditions.
- When there is a cutter unit in KE-3020/3020R
→ A modification kit is required.
- When there is no cutter unit in KE-3020/3020R
→ A modification kit is not required.
For
setting the change trolley of KE-3020/20R in this model, no modification kit is
required.
- 47 -
6.2. Maximum Number of Feeders Available on a Mounter
(1) Mechanical feeders
Name
The number of
feeders available
on the front side
The number
of feeders
available on
the rear side
Total number
of feeders
available
The number
of slots
occupied
Mounting
pitch
8 mm tape feeder 40 40 80 (80 types) 2 17.0 mm
12 mm tape feeder
26 26 52 3 25.5 mm
16 mm tape feeder
26 26 52 3 25.5 mm
24 mm tape feeder
20 20 40 4 34.0 mm
32 mm tape feeder
16 16 32 5 42.5 mm
32 mm paper adhesive
tape feeder
16 16 32 5 42.5 mm
44 mm tape feeder 10 10 20 8 68.0 mm
56 mm tape feeder 10 10 20 8 68.0 mm
72 mm tape feeder 8 8 16 10 85.0 mm
Stick feeder type N 26 26 52 3 25.5 mm
Stick feeder type W 13 13 26 6 51.0 mm
Stack stick feeder
(Note 1)
5 ― 5 8 68.0 mm
Bulk feeder 40 ― 40 2 17.0 mm
Note 1: The number of feeders that can be installed on the front side is up to five.
(2) Electric feeders
Name
The number of
feeders
available on the
front side
The number
of feeders
available on
the rear side
Total number
of feeders
available
The number
of lanes
occupied
(*1)
Mounting
pitch
4 mm tape feeder
40
40
80 (80 types)
1
17.0 mm
8 mm tape feeder
40
40
80 (80 types)
1
17.0 mm
8 mm double lane tape
feeder
(
*
2)
40 40 80 (160 types) 1 17.0 mm
12 mm tape feeder
40 40 80 1 17.0 mm
16 mm tape feeder
20 20 40 2 34.0 mm
24 mm tape feeder
20 20 40 2 34.0 mm
32 mm tape feeder
13 13 26 3 51.0 mm
44 mm tape feeder
13 13 26 3 51.0 mm
56 mm tape feeder
10 10 20 4 68.0 mm
72 mm tape feeder (*3)
6 6 12 5 85.0 mm
88 mm tape feeder (*3)
5 5 10 6 102.0 mm
Stick feeder type N (*4)
20 20 40 2 34.0 mm
Stick feeder type W (*4)
13 13 26 3 51.0 mm
*1: One lane occupied by electric feeders is mostly equivalent to two slots occupied by mechanical
feeders.
*2: To use an 8 mm double lane tape feeder, be sure to use a tape reel attaching platform for electric
feeder.
*3: Since five lanes on each side of the bank, left and right are not to be used, the number of lanes show
n
i
n the table above can be used.
*4: Attach the RF_ETF_ATTACHMENT when Stick feeders are used by a feeder trolley (RF)
- 48 -
(3) Tray feeders
Name
Dedicated
bank types
The number
of feeders
available on
the front side
The number
of feeders
available on
the rear side
Total number
of feeders
available
The number
of slots
occupied
Tray holder
Full type
Mechanical
bank
― 2 2 42
Electric bank
―
2
2
42
Half type
Mechanical
bank
― 4 4 21
Electric bank ― 4 4 21
DTS（TR1SNR）
Mechanical
bank
― 1(2-sheets) 1(2-sheets) 48
DTS
（
TR1EB
）
Electric bank
―
1(2-sheets)
1(2-sheets)
48
MTS (TR5SNX)
Mechanical/
combined bank
― 1(40-stages) 1(40-stages) 80
MTS (TR5DNX) (TR7DN)
Mechanical
combined bank
―
1
(40-stages )
(Note 2)
1(40-stages
(Note 2)
80
MTC (TR6SNV), (Note 1)
Mechanical/ele
ctric combined
bank
― ― 1(20-stages) ―
MTC (TR6DNV) (Note 1)
Mechanical/ele
ctric combined
bank
― ―
1(30-stages)
(Note 3)
―
Note 1 : TR6DXLX/6SXLX is dedicated to the XL specification.
Note 2 : 40 sheets of 20 types in the nonstop mode
Note 3 : 30 sheets of 15 types in the nonstop mode
(4) Wafer supply unit
Name
The number of
feeders available
on the front side
The number
of feeders
available on
the rear side
Total number
of feeders
available
The number
of slots
occupied
Multi-die server (DF01)
―
1 (10 stages)
1 (10 stages)
80
See Section 6.8 “Multi-die Server” for details.