Host Computer System.pdf - 第147页

AVK3 HOST COMPUTER SYSTEM 5.8 Del eting P arts Program D77HEC-50- 470-A0 5.8- 2  Protocol  Condition  Can be used in opt ional specif ic ation.  Vali d i n O NLINE m ode only .  Can be del eted conti nuously unti l …

100%1 / 174
AVK3
HOST COMPUTER SYSTEM
5.8 Deleting Parts Program
D77HEC-50-470-A0
5.8-1
5.8. Deleting Parts Program
D77HEC-50-470-A0
5.8.1 Deleting Parts Program
If the host computer gives C4 command to AVK3, the parts program registered in the AVK3 can be deleted.
Deleting parts program will end when A2 command is returned from the host computer.
Data details
Deletion of 1 program can be done by giving D1 command from the host computer after A0 command (data
request) has been sent from the AVK3.
If sending parts data deletion from the host computer, the deleted program name (Program control No.) is
returned from the AVK3 by D1 command.
No. Data name
Max.
digits
Input range
Sup-
press
Vari-
able
Remarks
1
Program control
No.
3 000 to FFF
×
If other than the valid character
within 3 digits, it becomes an
error.
If less than 3 digits, ‘0’ is affixed
to the front.
Ex.) U1 → U001
Even if a program name is
added after the control No., the
name is ignored.
If unregistered, it becomes an
error.
STX
C 4 U D
No. of
characters
ETX
Check sum
STX
D 1 U x
No. of
characters
1
x x
ETX Check sum
AVK3
HOST COMPUTER SYSTEM
5.8 Deleting Parts Program
D77HEC-50-470-A0
5.8-2
Protocol
Condition
Can be used in optional specification.
Valid in ONLINE mode only.
Can be deleted continuously until ‘A2’ is received.
If execution program is designated to be deleted during operation, ‘A4E00’ is returned.
Start of program
deletion
Host computer
Requests data.
AVK3
C4UD
A 0
Sends out the program
name deleted.
D 1 U control No.: 3 digits
D 1
U deletion control No.:
3 digits
A2
Name
Transfers the
program No. to be
deleted.
AVK3
HOST COMPUTER SYSTEM
5.9 Deleting P.C.B. Data Program
D77HEC-50-480-A1
5.9-1
5.9. Deleting P.C.B. Data Program
D77HEC-50-480-A1
5.9.1 Deleting P.C.B. Data Program
If the host computer gives C4 command to AVK3, the PCB data program registered in the AVK3 can be
deleted.
Deleting PCB data program will end when A2 command is returned from the host computer.
Data details
Deletion of 1 program can be done by giving D1 command from the host computer after A0 command (data
request) has been sent from the AVK3.
If sending PCB data program deletion from the host computer, the deleted program name (Program control
No.) is returned from the AVK3 by D1 command.
Host computer ⇒ AVK3
No. Data name
Max.
digits
Input range
Sup-
press
Vari-
able
Remarks
1 Program name 15
‘0’ to ‘9’
‘A’ to ‘Z’
Special character
×
If other than the valid character,
it becomes an error.
If unregistered, it becomes an
error.
AVK3 ⇒ Host computer
No. Data name
Max.
digits
Input range
Sup-
press
Fix Remarks
1
Program name
(deleted)
15
×
When the number of characters
is less than 15, the registered
program name is output as it is.
STX
C 4 C D
No. of
characters
ETX
Check sum
STX
D 1 C x
No. of
characters
1
x x
ETX
Check sum