User-Manual-NeoDen3V-PNP-machine.pdf - 第20页

15 Y ou can use Nozzle 1 ， No zzle 2 ， needle to for workbenc h moveme nt. Or you can u se d own-looking ca mera fo r visual minor adju stment. Locate the compon ent’ s center as c oordinate s, click “Sav e” and re turn …

2.1.3.2. Manual Programming

Select “Chip list” to start manual programming.

Function: it’s used to display footprints, coordinates, angles and sequences of components. You can choose to

manually add these information or import coordinates file directly.

 Chip List Setup

First, tick the box in front of “Manual”, you will see an example of component in chip list. You can click ”Align”

to locate this component’s position and revise it accordingly.

You can use Nozzle 1，Nozzle 2，needle to for workbench movement. Or you can use down-looking camera for

visual minor adjustment.

Locate the component’s center as coordinates, click “Save” and return to Chip list. Then you can fill the left

information of components(note: designator, package, foot print and angel. The angel of horizontal component is

0°or 180°, the angel of vertical component can be different from +90°to -90°according to its polarity(Active

Components) . All the angel value should be integer.

After completed all information for the first component, you can click “New” to create a new component. Its

default coordiantes will be same to previous one, you just need to click “align” and relocate its correct position,

save the data and back to fill the left information.



Sequence of Components

You may have to rearrange the sequence of components after programming, here are 3 ways available.

1) Move up: select the component and click “up” to move it up.

2) Move down: select the component and click “down” to move it down.

3) Move to first place: select the component and click this button to move it up to the first place.

2.1.3.3. Re-Edit

Function: it’s used to edit the file after you have find there is an offset due to the board twisting.

Either import coordinate file or manually programming, you can edit the file by using this button.

1) Please advance the board to the setup position, then click “Feed” in PCB feed settings.

2) After the board arrives to its destination, click “change to current position” button, it will pop up a

message(refer to the image as below), click “Yes”, then the down-looking camera will start to recognize

fiducial marks.

3) After that, coordinates will be automatically converted to absolute values(machine coordinate) according to

the location and angle of board.

Then you can click align to adjust coordinates accordingly.

2.1.3.4. Import PCB Coordinate File

 Generate the coordinate file from PCB layout, make sure the unit is metric and the format is .csv. After

re-arrange the sequence of coordinate information that NeoDen3V could read, save and copy the file into

flash drive, connect it with the machine.

 Go to the programming file screen, unselect “Manual”, click “ Import Top file” button (refer to Illus.2.1.3.4),

select the coordinate file in the pop up. All the data will be imported automatically.