User-Manual-NeoDen3V-PNP-machine.pdf - 第4页
IMPOR T ANT IN ORDER TO USE THE PICK AND PLA CE MACHIN E SAFEL Y , PLEASE READ THIS USER MANUAL COMPLETEL Y AND UNDE RST AND IT THOROUGHL Y BEFORE OPERA TI NG THIS UNIT AND RET AIN THIS BOOKLET FOR FUTURE REFER ENCE Safe…
2.5.3.3. Inspection Standard..................................................................................................................30
2.6. Continuous SMT Production..................................................................................................................30
3. Structure and maintenance instruction..............................................................................................................31
3.1. Structure Chart................................................................................................................................................31
3.1.1. Peel Box...................................................................................................................................... 31
3.1.2. Tape Reel Loading.......................................................................................................................32
3.1.3. Nozzle..........................................................................................................................................32
3.1.3.1. Size of Nozzle.................................................................................................................. 32
3.1.3.2. Reference of Nozzle Selection.........................................................................................33
3.2. Maintenance........................................................................................................................................... 34
3.2.1. Reinforce Daily Maintenance..................................................................................................... 34
3.2.2. Requirement for Operator........................................................................................................... 34
3.2.3. Formulate Measures to Reduce/ Avoid Mistake......................................................................... 34
3.2.4. Maintenance of Device............................................................................................................... 35
3.2.4.1. Check Below Points Daily............................................................................................... 35
3.2.4.2. Check Below Points Monthly.......................................................................................... 35
3.2.5. Related Issues During Solder Paste Printing Process................................................................. 36
3.2.5.1. Stencil Printer Technology...............................................................................................36
3.2.5.2. Inspecting of Solder Paste Printing..................................................................................36
3.2.5.3. Instruction about Soldering Printing................................................................................37
IMPORTANT
IN ORDER TO USE THE PICK AND PLACE MACHINE
SAFELY, PLEASE READ THIS USER MANUAL
COMPLETELY AND UNDERSTAND IT THOROUGHLY
BEFORE OPERATING THIS UNIT AND RETAIN THIS
BOOKLET FOR FUTURE REFERENCE
Safety Device, Warning Label
1. Before operation, please ensure the presence of adequate guarding and safety devices to avoid accident.
2. When tear down the safety device, please keep it in the original position,and make sure it works in good
condition.
3. Please make sure the warning label can be seen clearly. If peeled off or stained, please contact us freely
for a new one. When safety device malfunctions, no running of the machine after removing safety device.
Or it will cause severe injuries and casualty accidents.
Usage
1. You agree that you will solely be responsible for your using of any products and services provided to you
and that you will use our products and services legally and only for the purposes that they are intended to
be used for.
2. You agree that you will not misuse the products and/or services supplied and that you will abide by any
laws applicable to this agreement or the operation of it.
Training
In case of any accidents that caused by improper operation, only those who have the training designated by
Neoden, equipped with proper knowledge and operation skills can operate this machine.
Notes
1. Please read this user manual completely before operating this unit and retain this booklet for
future reference.
2. The contents include all features of NeoDen 3V, some of which may not be equipped on
your machine.
3. Basic training and basic SMT knowledge is required for an operator.
4. For routine inspection and repair,please contact sales for operating instruction. During the
repairing process, please use the spare parts provided by Neoden.
CAUTION
Power off: After cut off main power supply, pull the plug or disconnect the power cable from the power supply.
1. When an exception or failure happens, or power failure,please terminate the operation of Windows,and
power it off.
2. Power off prior to cleaning and repairing in case of any accidents.
When pull the plug, please hold the head instead of wire.
Attention Should be Paid to During the Procedure
Transport
Please take necessary security measures to prevent upside down or fall when lifting or moving.
Open
1. Please read all instruction in the wooden box.
2. Do not cut the packing tape by knife to avoid scratch the machine.
3. Keep all packing material.
Installation
1. Please put the machine in a horizontal place.
2. Please keep the floor clean and dry, and the machine should be grounded, to prevent electric shock or
leakage.
Prepare Work
1. Make sure the power cable no damage, no shedding and no loose.
2. Keep hands off the working area.
Maintenance
1. Repair and calibration should be operated by skilled mechanical technician.When replacing parts,please
use the part which are supplied by NeoDen.We are not responsible for any accident result from using
nonstandard part.
2. In order to prevent electric shock caused by unskilled operation,the electrical
repairs,maintenance(including wiring),should be operated by professional electrician or the technical staff
from NeoDen or our distributors.
3. Make sure Bolts - Nuts are tighten after repair,calibration or replacing any part.
Working Environment
1. Do not use machine in a noisy environment,such as high frequency welding machine.
2. Do not use machine if the power supply voltage exceed the rated voltage ± 10%. Do not use machine and
pull the plug when thunder to avoid any accident caused by damaged electrical component.