00191297-02.pdf - 第141页

User Manual SIPLAC E S-23 HM 5 Single Functions Software Version S R.405.xx 05/99 Issue 5.1 General comments 139 5 Single Functions 5.1 Gen eral c omm ent s Gantry fun ctions a nd trans port func tions ar e known as sing…

4 Placement Functions User Manual SIPLACE S-23 HM

4.3 Feeders Software Version SR.405.xx 05/99 Issue

138

User Manual SIPLACE S-23 HM 5 Single Functions

Software Version SR.405.xx 05/99 Issue 5.1 General comments

139

5 Single Functions

5.1 General comments

Gantry functions and transport functions are known as single functions. They are used to set up

and test the machines and to carry out particular actions following a machine shutdown caused

by an error.

Single functions can be used to control various function modules in a defined manner.

WARNING

Single functions may only be executed by appropriately qualified and trained personnel, since

improper handling can result in personal injury/damage to the machine.

5 Single Functions User Manual SIPLACE S-23 HM

5.2 Single functions, Gantry Software Version SR.405.xx 05/99 Issue

140

5.2 Single functions, Gantry

NOTE

The travel functions of the x or y axis can only be carried out when the machine cover is closed.

To execute this function, press the start button.

As a rule, the gantries only travel slowly. 5

È On the tool bar in the main view, click the symbol which represents the gantry you want to test

the functions of (or select the appropriate item from the "View" menu, e.g. "Gantry 1" for

Gantry 1).

NOTE

The single functions can be called for each of the 2 gantries. The single functions are identical

for all gantries. Each of the 2 symbols used to call the single functions is marked with the

number of the corresponding gantry:

Example for Gantry 1. 5

The user interface changes to display the "Revolver head functions" screen for the selected

gantry (see Fig. 5.2 - 1). 5

5.2.1 "Revolver head functions" screen

The revolver head functions can be used to control all functions relating to the revolver head. 5

NOTE

The revolver head functions can be executed with the machine cover open. To do this the key-

operated switch must be turned to position I. 5