00191297-02.pdf - 第159页
User Manual SIPLAC E S-23 HM 5 Single Functions Software Version S R.405.xx 05/99 Issue 5.2 Single functions, Gantry 157 Confirm magaz. 5 This func tion is u sed to co nfirm tha t an in dividual magazi ne has bee n fille…
5 Single Functions User Manual SIPLACE S-23 HM
5.2 Single functions, Gantry Software Version SR.405.xx 05/99 Issue
156
5.2.6.2 Functions
Lock. op./close 5
To be able to fill the magazine manually, you must use this function to open the lock (locking
plate) on the nozzle changer and close it afterwards.
È Click the Lock. op./close button.
The magazine locking plate is opened.
È Click the Lock. op./close button.
The magazine locking plate is closed again.
Refill 5
This function allows you to refill the magazine with new nozzles of the type already in use (or in
other words, the set-up itself is not changed).
During placement operation it may be necessary to refill individual magazines with nozzles. You
must fill the magazine with 12 nozzles and these must be of the same type that were originally
contained in the magazine. 5
The nozzle types shown in the columns "Actual" and "Preset" of the table will agree.
The number of nozzles in the magazine is shown in the "Number" column. 5
È Select the entry corresponding to the magazine you want to fill with nozzles. This line is then
highlighted in light blue.
È Click the Lock. op./close button.
È Fill the magazine with the same type of nozzle it originally contained.
NOTE
The magazines must always be completely refilled (12 nozzles of the same type for each
magazine). 5
È Click the Lock. op./close button again.
È Click the Refill button.
The entry in the "Number" column is updated and now shows the new number of nozzles in
the magazine.
User Manual SIPLACE S-23 HM 5 Single Functions
Software Version SR.405.xx 05/99 Issue 5.2 Single functions, Gantry
157
Confirm magaz. 5
This function is used to confirm that an individual magazine has been filled with a new nozzle
type.
When changing the set-up of a machine it may be necessary to change the type of nozzle in
some of the magazines. To do this, the current nozzle configuration (Actual) and the nozzle con-
figuration for the new set-up (Preset) is shown in the table for each of magazine. When you
change the nozzle type from the "Actual" to "Preset" type, you must confirm this for each maga-
zine separately.
È Click the entry in the table which corresponds to the magazine for which you must change the
nozzle type. The line is now highlighted in light blue.
È Click the Lock. op./close button.
È Replace all the nozzles in this magazine with the nozzle type shown in the "Preset" column.
È Click the Lock. op./close button again.
È Click the Confirm magaz. button.
The change of is now confirmed. In the table, the arrow ( <== ) is no longer displayed next to
the entry for this magazine.
5
5
5 Single Functions User Manual SIPLACE S-23 HM
5.3 Single functions, Transport Software Version SR.405.xx 05/99 Issue
158
5.3 Single functions, Transport
NOTE
The travel functions of the x or y axis can only be carried out when the machine cover is closed.
To execute this function, press the start button.
As a rule, the gantries only travel slowly. The revolver head is set to travel slowly. 5
È On the tool bar in the main view, click the symbol which represents the transport you want to
test the functions of (or select the corresponding menu item from the "View" menu, e.g. "Trans-
port 1" for Transport 1).
NOTE
When dual transport is installed and available in the machine configuration, the single func-
tions can be called for either the right-hand transport (Transport 1) or the left-hand transport
(Transport 2). The functions are identical for both right and left. The symbols used to call the
single functions are marked with the number which corresponds to the transport side.
Example for Transport 1 (= right-hand transport or single transport). 5
The user interface is switched to the "Transport functions" screen of the selected transport (see
Fig. 5.3 - 1). 5
5