3OM-1064-001.pdf - 第191页

Pri ori ty No. Item (Section A) Check Message (Section B) Check Code Rem arks SET OPERA TI ON M ODE TO PL ACEM ENT. 030101XX PLEASE SELECT THE AVAI LABLE MEN U. 030102XX SET ENA BLE F OR DESTI NATI ON ALT ERNATE F EEDER.…

3. List of Check Messages

0005-002 3-4 Tg0248-PM-ER

Priority

No.

Item (Section A) Check Message (Section B) Check Code Remarks

EMERGENCY STOP

TURN OFF THE [EMERGENCY STOP] BUTTON AND

TURN ON THE [POWER ON] BUTTON.

010101XX

AIR PRESSURE DROP

INCREASE AIR PRESSURE AND PRESS THE [POWER

ON] BUTTON TO POWER UP THE MACHINE.

010201XX

CUT OFF THE LOAD

POWER CIRCUIT

PRESS THE [POWER ON] BUTTON TO POWER UP THE

MACHINE.

010301XX

CLOSE THE MAINTENANCE COVER [A] (BACK SIDE) AND PRESS

THE [POWER ON] BUTTON TO POWER UP THE MACHINE.

010401XX

CLOSE THE MAINTENANCE COVER [A] (BACK SIDE)

010402XX

CLOSE THE MAINTENANCE COVER [B] (FRONT SIDE) AND PRESS

THE [POWER ON] BUTTON TO POWER UP THE MACHINE.

010403XX

MAINTENANCE

COVER

CLOSE THE MAINTENANCE COVER [B] (FRONT SIDE)

010404XX

CLOSE THE SAFETY BAR[A] (BACK SIDE) AND PRESS THE

[POWER ON] BUTTON TO POWER UP THE MACHINE.

010501XX

CLOSE THE SAFETY BAR[B] (FRONT SIDE) AND PRESS THE

[POWER ON] BUTTON TO POWER UP THE MACHINE.

010502XX

CLOSE THE SAFETY BAR[A] (BACK SIDE) AND PRESS THE

[READY [A] ] BUTTON TO SET FEEDER [A] IN READY MODE.

010503XX

SAFETY BAR

CLOSE THE SAFETY BAR [B] (FRONT SIDE) AND PRESS THE

[READY [B] ] BUTTON TO SET FEEDER [B] IN READY MODE.

010504XX

CIRCUIT PROTECTOR IS ACTIVE IN THE MACHINE.

010601XX

CIRCUIT PROTECTOR FOR BEAM-A IS ACTIVE.;K101A

010602XX

CIRCUIT PROTECTOR FOR BEAM-B IS ACTIVE.;K101B

010603XX

CIRCUIT PROTECTOR FOR BACKUP UP/DOWN (BPC-

AXIS) IS ACTIVE.;Q351

010604XX

CIRCUIT PROTECTOR FOR CONVEYOR WIDTH (PWC-

AXIS) IS ACTIVE.;K51

010605XX

CIRCUIT PROTECTOR FOR TRAY-L IS ACTIVE.;TL-Q501

010606XX

♦

CIRCUIT PROTECTOR FOR TRAY-R IS ACTIVE.;TR-Q501

010607XX

♦

CIRCUIT PROTECTOR FOR TRAVERSE IS ACTIVE.;Q401,402

010608XX

CIRCUIT PROTECTOR FOR FEEDER [A] (BACK SIDE) IS

ACTIVE.; Q131, 132

010609XX

CIRCUIT PROTECTOR

CIRCUIT PROTECTOR FOR FEEDER [B] (FRONT SIDE)

IS ACTIVE.;Q133, 134

010610XX

CLOSE THE COMPONENT SUPPLY COVER [A] (BACK

SIDE) AND PRESS THE [POWER ON] BTN. TO POWER

UP THE MACHINE.

010701XX

CLOSE THE COMPONENT SUPPLY COVER [B] (BACK

SIDE) AND PRESS THE [POWER ON] BTN. TO POWER

UP THE MACHINE.

010702XX

CLOSE THE COMPONENT SUPPLY COVER [B] (BACK

SIDE) AND PRESS THE [READY [B] ] BUTTON TO SET

FEEDER [B] IN READY MODE.

010703XX

SUPPLY COVER

CLOSE THE COMPONENT SUPPLY COVER [A] (BACK

SIDE) AND PRESS THE [READY [A] ] BUTTON TO SET

FEEDER [A] IN READY MODE.

010704XX

BEAM ABNORMAL

APPROACH

OPEN THE SUPPLY COVER AND PULL AWAY THE

ABNORMALLY APPROACHING BEAM BY HAND.

010801XX

BEAM POWER

CUT OFF

BEAM POWER CUTOFF IS DETECTED. PRESS THE [SYS

CLR] BUTTON.

010901XX

Priority

No.

Item (Section A) Check Message (Section B) Check Code Remarks

SET OPERATION MODE TO PLACEMENT.

030101XX

PLEASE SELECT THE AVAILABLE MENU.

030102XX

SET ENABLE FOR DESTINATION ALTERNATE FEEDER.

030103XX

MACHINE IS IN PAUSE MODE.

030104XX

INPUT CORRECT DATA FOR MANUAL AXIS

OPERATION.

030105XX

PLEASE INPUT CORRECT NOZZLE TYPE DATA.

030106XX

INPUT NON-DEFECTIVE P.C.B.

㧔

O-NO

㧕

030107XX

WAIT UNTIL DATA COMMUNICATION WITH EXTERNAL

DEVICE IS COMPLETED.

030108XX

PLEASE CANCEL “SET UP” MODE AS CLOSING A

MAINTENANCE COVER [A] (BACK SIDE)

030109XX

PLEASE CANCEL “SET UP” MODE AS CLOSING A

MAINTENANCE COVER [B] (FRONT SIDE).

030110XX

REMOVE P.C.B. ON L-CONVEYOR.

030111XX

No Checking in

“TEST” Mode

REMOVE P.C.B. ON P-CONVEYOR.

030112XX

No Checking in

“TEST” Mode

REMOVE P.C.B. ON R-CONVEYOR.

030113XX

No Checking in

“TEST” Mode

REMOVE P.C.B. ON EL-CONVEYOR.

030114XX

No Checking in

“TEST” Mode

REMOVE P.C.B. ON ER-CONVEYOR.

030115XX

No Checking in

“TEST” Mode

SET TRAY-L OPERATION MODE TO

“

LINE

”

030116XX

♦

SET TRAY-R OPERATION MODE TO

“

LINE

”

030117XX

♦

CLOSE THE TRAY-L UPPER DOOR.

030118XX

♦

CLOSE THE TRAY-L LOWER DOOR.

030119XX

♦

CLOSE THE TRAY-R UPPER DOOR.

030120XX

♦

CLOSE THE TRAY-R LOWER DOOR.

030121XX

♦

INPUT THE TEST ID

030122XX

♦

INPUT THE FEEDER NO.

030123XX

♦

SET JIG P.C.B.

030124XX

♦

IT ISN’T PRACTICABLE WITDTH

“

SET UP

”

MODE.

030125XX

NOZZLE IS NOT ATTACHED WITH HEAD.

030126XX

NOZZLE IS ATTACHED WITH HEAD.

030127XX

NOZZLE IS NOT STORED AT THE SPECIFIED NOZZLE

STOCKER ADDRESS.

030128XX

L-AXIS IS NOT NEAR ORIGIN.

030129XX

CHECK THE L TRAY MATRIX DATA(X,Y). (SHORTAGE

OF COMPONENT IS DETECTED.)

030130XX

CHECK THE R TRAY MATRIX DATA(X,Y). (SHORTAGE

OF COMPONENT IS DETECTED.)

030131XX

BPC-AXIS NOT ORIGIN.

030132XX

P.C.B. IS NOT LOCATE ON THE P-CONVEYOR.

030133XX

CLOSE NOZZLE STOCKER A1.

030134XX

CLOSE NOZZLE STOCKER A2.

030135XX

OPERATORS ERROR

CLOSE NOZZLE STOCKER B1.

030136XX

SET VACUUM OF A1-HEAD TO “OFF” IN MANUAL

SUBSYSTEM OPERATION MENU.

030137XX

SET VACUUM OF A2-HEAD TO “OFF” IN MANUAL

SUBSYSTEM OPERATION MENU.

030138XX

SET VACUUM OF B1-HEAD TO “OFF” IN MANUAL

SUBSYSTEM OPERATION MENU.

030139XX

SET VACUUM OF B2-HEAD TO “OFF” IN MANUAL

SUBSYSTEM OPERATION MENU.

030140XX

THE BANK CARRIAGE CART IS NOT LOCATED AT ITS

STATIONARY POSITION.

CONNECT IT CORRECTLY OR DISCONNECT IT

COMPLETELY FROM THE MACHINE.

030141XX

♦

3. List of Check Messages

0005-002 3-5 Tg0248-PM-ER

♦

Priority

No.

Item (Section A) Check Message (Section B) Check Code Remarks

BANK CARRIAGE CART-A IS NOT LOCATED AT THE

SPECIFIED POS. FOR CONNECTION.

MOVE THE CART TO THE SPECIFIED POSITION

THROUGH THE SETUP OPERATION.

030142XX

♦

BANK CARRIAGE CART-B IS NOT LOCATED AT THE

SPECIFIED POS. FOR CONNECTION.

MOVE THE CART TO THE SPECIFIED POSITION

THROUGH THE SETUP OPERATION.

030143XX

♦

BANK CARRIAGE CART-A IS NOT LOCATED AT THE

POS. WHERE IT CAN BE CONNECTED.

MOVE THE CART TO POS. WHERE CART CAN BE

CONNECTED THROUGH THE SETUP OPE.

030144XX

♦

BANK CARRIAGE CART-B IS NOT LOCATED AT THE

POS. WHERE IT CAN BE CONNECTED.

MOVE THE CART TO POS. WHERE CART CAN BE

CONNECTED THROUGH THE SETUP OPE.

030145XX

♦

REMOVE THE P.C.B. AT INLET OF CONVEYOR.

030146XX

♦

PLEASE INPUT BARCODE DATA IN MANUAL INPUT

SCREEN.

030147XX

♦

CANCEL BYPASS OPERATION OF SELECTED HEAD OR

DO NOT USE THE HEAD.

030201XX

HEAD BYPASS

THE SPECIFIED HEAD IS BYPASSED.

030202XX

BEAM ABNORMAL

APPROACH

BEAM APPROACH DETECTION SENSOR IS DETECTED.

PRESS THE [SYS CLR] BUTTON.

030301XX

030401XXALTERNATED TRAY L

MAGAZINE

BOTH UPPER AND LOWER MAGAZINES CANNOT BE

STARTED BECAUSE BOTH ARE CONNECTED.

ALTERNATED TRAY R

MAGAZINE

BOTH UPPER AND LOWER MAGAZINES CANNOT BE

STARTED BECAUSE BOTH ARE CONNECTED.

000501XX

NO CURRENT

SELECT THE CURRENT PROGRAM.

050101XX

SET UP CONVEYOR WIDTH (PWC-AXIS).

050201XX

SETUP CHECK

SET UP P.C.B. LOCATE LEVER (PPC-AXIS).

050202XX

♦

REMOVE FEEDER OF FEEDER BASE #1 CONNECTOR #11.

050301XX

REMOVE FEEDER OF FEEDER BASE #1 CONNECTOR #12.

050302XX

REMOVE FEEDER OF FEEDER BASE #1 CONNECTOR #13.

050303XX

REMOVE FEEDER OF FEEDER BASE #1 CONNECTOR #14.

050304XX

REMOVE FEEDER OF FEEDER BASE #1 CONNECTOR #15.

050305XX

REMOVE FEEDER OF FEEDER BASE #1 CONNECTOR #16.

050306XX