CM88Maintenace2x.PDF.pdf - 第4页
Page 2-4 3Y3C-E-MMD02-A01-00 Items of Machine Parameter 2-1-2 Head Rotating Center This parameter is set by “Head exchange teach.” The distance between the rotating center for each transfer head and two recognition camer…
Page 2-3
MACHINE PARAMETER
2
3Y3C-E-MMD02-A01-00
Items of Machine Parameter
2-1-1 Head Angle Origin
This parameter is set by “Head exchange teach” in “Machine maintenance.”
The angle origin offsets for each transfer head and height sensor position offset are displayed on
the screen.
Angle origin offset
The difference between the angle when the reference nozzle (1005) is at the center of the
recognition camera and the one of the mechanical origin is displayed.
Height sensor position angle origin offset
The difference of angle between the reference nozzle (1005) turned to the height sensor position
and the center of the sensor is displayed.
Page 2-4
3Y3C-E-MMD02-A01-00
Items of Machine Parameter
2-1-2 Head Rotating Center
This parameter is set by “Head exchange teach.”
The distance between the rotating center for each transfer head and two recognition camera
centers is displayed on the screen.
Pressing changes camera display for the large and small cameras in turn.
Camera for extra-large chip is also, prepared for three.
Camera
Small chip
Page 2-5
MACHINE PARAMETER
2
3Y3C-E-MMD02-A01-00
Items of Machine Parameter
2-1-3 Nozzle Height and Arrangement
This parameter is set by “Nozzle exchange tea2ch” or “Head exchange teach.”
The nozzle height for each transfer head of each nozzle, and nozzle height reference value are
displayed.
Nozzle height
The length of sensor pass, when the nozzle is rotated to the height sensor, is displayed.
The smaller value of “Nozzle height” indicates the nozzle extended more.
Nozzle height basis
The height of nozzle (head No. 1: 1005 nozzle) to use in teaching the reference stroke (offset Z)
for pickup and mount sections is displayed.
pos 1 1005 to pos 5 Large
Data of nozzle selected here is displayed at the blank for “Each head.”