00195094-0202-MM-D3_EN.pdf - 第23页
SIPLACE D3 5 Daily maintenance jobs 08/2008 US Edition 23 V acuum the feeder modules 5 5 Keep at least 1 cm away from the feeder module to avoid damag ing the component covers. 5 5 a Carefully clean the feeder area with …
5 Daily maintenance jobs SIPLACE D3
08/2008 US Edition
22
5
SIPLACE D3 5 Daily maintenance jobs
08/2008 US Edition
23
Vacuum the feeder modules 5
5
Keep at least 1 cm away from the feeder module to avoid damaging the component covers. 5
5
a Carefully clean the feeder area with a vacuum cleaner.
There should be no loose components in the feeder area.
5
: Close the protective cover.
: Press the Start button.
5
The placement machine can continue placement during the next steps. 5
5
5
5
Empty waste tape container 5
s Pull the waste tape co
ntainer out of the component trolley.
d Empty it into the waste bin.
5
When you pull out the waste container, hold it flat so that none of the waste tape drops out. 5
5
5
Empty the waste container as it fills up with waste. 5
5
5
: Repeat the "daily maintenance jobs" at every feeder area.
5
5
5
5
5
5
6 Weekly maintenance jobs SIPLACE D3
08/2008 US Edition
24
6 Weekly maintenance jobs
6