00195094-0202-MM-D3_EN.pdf - 第60页
9 4-monthly maintenance jobs SIPLACE D3 08/2008 US Edition 60 9
SIPLACE D3 9 4-monthly maintenance jobs
08/2008 US Edition
59
Valve adjustment drives 9
a Clean the valve adjustment drives and the gap betwee
n the disk and the motor bracket with a
dry lint-free cloth.
s Clean the ball bearing with a dry lint-free cloth.
: Check that
the
ball bearing is working correctly.
: Remove any visible dirt.
9
Turning station 9
d Wipe the black O-ring of the turning station with a lint-free cloth moistened with ethyl alcohol.
: Check the O-
rin
g for damage. Replace, if required.
: Check the toothe
d belt for damage, Replace, if required.
9
The turning station can be cleaned while still installed using a cottonwool bud moistened with ethyl
alcohol. 9
9
f Press the friction wheel of the turning station against the spring.
f Clean the stop surfaces using a cottonwoo
l bud moistened with ethyl alcohol.
9
Assembly 9
: Insert the two O-rings into the back part of head.
: Carefully insert the distributor
into it
s seat.
9
The O-rings must not be seated on the distributor, otherwise they may be damaged. 9
9
9
: Turn the placement star half a step (approx. 15° - 30°), fit the front part of the head and screw
tight.
: Attach the ribbon cables to the ap
propriate connectors.
9
: Insert cleaned or new sleeves into the segments.
: Insert cleaned or new valve plungers into the valve casings.
9 4-monthly maintenance jobs SIPLACE D3
08/2008 US Edition
60
9
SIPLACE D3 9 4-monthly maintenance jobs
08/2008 US Edition
61
Vacuum generator 9
a Detach the vacuum generator hoses.
s Unscrew the block with the 2 Venturi nozzles using a 2.5 mm hexagon socket spanner.
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9