00195094-0202-MM-D3_EN.pdf - 第82页
10 Annual maintenance work SIPLACE D3 08/2008 US Edition 82 10
SIPLACE D3 10 Annual maintenance work
08/2008 US Edition
81
a Unplug the four flat ribbon cables from the TwinHead.
10
s Unscrew four screws on each TwinHead module and remove both modules.
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10 Annual maintenance work SIPLACE D3
08/2008 US Edition
82
10
SIPLACE D3 10 Annual maintenance work
08/2008 US Edition
83
Clean/inspect additional volume filter 10
10
Keep one hand underneath while unscrewing the cap to catch the filter if it falls. 10
10
10
a Unscrew the union nut and pull the compressed air hose off.
The additional volume filter will drop out.
10
: Clean the filter by carefully blowing it out with compressed air.
: Check the filter fo
r damage.
If it is damaged replace it with a new one.
10
s Insert the filter once more and tighten the union nut.
d Make sure that the compressed air hose can move free
ly when the Z axis moves, that it is not
jammed at any point and does not obstruct the Z axis.
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10