00195094-0202-MM-D3_EN.pdf - 第71页

SIPLACE D3 10 Annual maintenance work 08/2008 US Edition 71 10 Remember to grease every visib le grease nipple on the X and Y axes! 10 Use the amount s of grease specified. T oo much or too little grease can damage the b…

100%1 / 98
10 Annual maintenance work SIPLACE D3
08/2008 US Edition
70
10
SIPLACE D3 10 Annual maintenance work
08/2008 US Edition
71
10
Remember to grease every visible grease nipple on the X and Y axes! 10
Use the amounts of grease specified. Too much or too
little grease can damage the bearing. 10
10
X axis 10
a Place the grease gun (X axis with lifting limiter), filled with Klüberplex BEM 34-132, straight on
the fun
nel-shaped grease nipple.
: Apply one squeeze of the grease
gun (approx. 0.13 cm
3
per squeeze).
10
If the grease emerges from the grease nipple, then either the bearing is already full or the grease
nipple is not sealing correctly. In the latter case, use a new grease nipple. 10
10
: Move the X-axis head plate approx. 30 cm to distribute the grease.
: Repeat the pressing and moving process two more times. This ensu
res that the right amount
of grease is applied.
: Use a cloth to remove any excess grease from on and around the grease nipple.
: Grease the other grease nipples on the X axis in the same way.
10
Y axis 10
s Place the grease gun (Y axis), filled with
Klüberplex BEM 34-132, straight onto the conical
grease nipple.
: Apply one squeeze of the grease
gun. (approx. 0.4 cm
3
per squeeze)
10
If the grease emerges from the grease nipple, then either the bearing is already full or the grease
nipple is not sealing correctly. In the latter case, use a new grease nipple. 10
10
: Move the gantry approx. 30 cm to distribute the grease.
: Repeat the pressing and moving process two more times. This ensu
res that the right amount
of grease is applied.
: Use a cloth to remove any excess grease from on and around the grease nipple.
: Grease the other grease nipples on the Y axis in the same way.
10
: Repeat the greasing process on all linear guides.
10 Annual maintenance work SIPLACE D3
08/2008 US Edition
72
10