00195094-0202-MM-D3_EN.pdf - 第92页
11 Maintain the sleeves SIPLACE D3 08/2008 US Edition 92 11
SIPLACE D3 11 Maintain the sleeves
08/2008 US Edition
91
a Remove the dirt from the longitudinal vacuum hole by turning the 1.4 mm drill bit clockwise in
the hole.
Turning the bit will remove the dirt from the hole.
s Remove the dirt from the transverse vacuum hole using the 1.1 mm drill bit.
11
Wear laboratory gloves for this step. 11
11
11
d Check the suction plate for damage.
Replace it if it is damaged.
d Clean the sleeve suction plate using a dry, lint-free cloth.
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11 Maintain the sleeves SIPLACE D3
08/2008 US Edition
92
11
SIPLACE D3 11 Maintain the sleeves
08/2008 US Edition
93
a Carefully clean the edge of the sleeve using a lint-free cloth moistened with ethyl alcohol.
11
s Clean the incremental disk of the sleeve using a lint-free cloth moistened with ethyl alcohol.
11
d Carefully clean the shaft of the sleeve using a lint-free cloth moistened with ethyl alcohol.
11
f Carefully clean the circumference of the ball catch with a cottonwool bud moistened with ethyl
alcohol.
11
11