00195094-0202-MM-D3_EN.pdf - 第44页
8 2-monthly maintenance jobs SIPLACE D3 08/2008 US Edition 44 8
SIPLACE D3 8 2-monthly maintenance jobs
08/2008 US Edition
43
Maintain the component feeder table 8
: Clear the feeder area.
: Remove any loose components from the component feeder table using the vacuum cleaner.
a Use a whetstone to remove any bumps on the magnetic rail.
s Preserve the feeder area using a lint-free cloth sprayed with WD40.
: Vacuum up any loose components from the tape container and remove any unwanted stickers
an
d ad
hesive tape.
d Cut off the excess used tape flush with the feeder and empty the component drawer or com-
ponen
t flap on 8 mm S feeders.
: Return the feeder modules to the feeder area.
Make su
re that each feeder is in the correct location and is connected correctly. 8
8
8
8
: Switch the placement machine on at the main switch.
8
If you often pull out the component trolley, we recommend that you: 8
Grease the plunger pins 8
: Dock
out the component trolley.
f Grease the plunger pins of the component trolley d
ocking unit with a brush and UNISILKON
L250L.
g Grease the plunger pins of the ODU connector on the component trolley docking unit with a
brush an
d UNISILKON L250L.
8
8
: Dock in the component trolley once more.
: Repeat these tasks in every placement area.
8
8
8
8
8 2-monthly maintenance jobs SIPLACE D3
08/2008 US Edition
44
8
SIPLACE D3 8 2-monthly maintenance jobs
08/2008 US Edition
45
Vacuum the felt filter drawer units 8
a Remove the covers from the felt filter the drawer units.
s Use an appropriate nozzle to vacuum the felt filters.
: Check the filter
mats for dirt after cleaning them with a vacuum cleaner.
Replace them if they are very dirty.
: Replace any worn felt filters.
: Fit the covers.
: Repeat these tasks for all eight fans.
8
8
Check the filter element 40 µm 8
: Remove the protective cover from the relevant placement head.
d Loosen the screw in order to remove the casing of the filter element 40 µm.
f Check whether
the filter element is discolored.
If it is discolored, replace it with a new element.
: Fit the casing and the head cover.
: Check the filter
elements of all the placement heads.
8
8
: Close the protective covers.
8