00195094-0202-MM-D3_EN.pdf - 第43页
SIPLACE D3 8 2-monthly maintenance jobs 08/2008 US Edition 43 Maint ain the component feeder t able 8 : Clear the feeder area. : Remove any loose component s from the component feeder table usi ng the vacuum cleaner . a …
8 2-monthly maintenance jobs SIPLACE D3
08/2008 US Edition
42
8
SIPLACE D3 8 2-monthly maintenance jobs
08/2008 US Edition
43
Maintain the component feeder table 8
: Clear the feeder area.
: Remove any loose components from the component feeder table using the vacuum cleaner.
a Use a whetstone to remove any bumps on the magnetic rail.
s Preserve the feeder area using a lint-free cloth sprayed with WD40.
: Vacuum up any loose components from the tape container and remove any unwanted stickers
an
d ad
hesive tape.
d Cut off the excess used tape flush with the feeder and empty the component drawer or com-
ponen
t flap on 8 mm S feeders.
: Return the feeder modules to the feeder area.
Make su
re that each feeder is in the correct location and is connected correctly. 8
8
8
8
: Switch the placement machine on at the main switch.
8
If you often pull out the component trolley, we recommend that you: 8
Grease the plunger pins 8
: Dock
out the component trolley.
f Grease the plunger pins of the component trolley d
ocking unit with a brush and UNISILKON
L250L.
g Grease the plunger pins of the ODU connector on the component trolley docking unit with a
brush an
d UNISILKON L250L.
8
8
: Dock in the component trolley once more.
: Repeat these tasks in every placement area.
8
8
8
8
8 2-monthly maintenance jobs SIPLACE D3
08/2008 US Edition
44
8