00195094-0202-MM-D3_EN.pdf - 第54页
9 4-monthly maintenance jobs SIPLACE D3 08/2008 US Edition 54 9
SIPLACE D3 9 4-monthly maintenance jobs
08/2008 US Edition
53
Star 9
a Wipe the star using a lint-free cloth.
: Apply a light film of ISOFLEX TOPAS NCA 52 grease to the running surface of the star brake.
Remo
ve
any visible excess grease.
9
Make sure that no dirt or grease gets into the vacuum channels. 9
9
9
9
The vacuum distributor disk is glued on. 9
9
9
9
Segments 9
9
When cleaning, be careful not to damage the sleeve retaining springs in the segments. 9
Do not push the cottonwool bud into the segment as far as
the retaining spring; otherwise the re-
taining spring may be pulled out. 9
9
s Carefully clean the segments using a cottonwool bud moistened with ethyl alcohol.
d Remove any visible dirt around the segments.
9
9
Valve casing 9
: Remove the valve plungers.
f Clean the valve casing using a cottonwool bud moistened with ethyl alcohol.
: Then clean all around the valve casings.
9 4-monthly maintenance jobs SIPLACE D3
08/2008 US Edition
54
9
SIPLACE D3 9 4-monthly maintenance jobs
08/2008 US Edition
55
Distributor (back part of head) 9
a Carefully remove the distributor toge
ther with the two O-rings.
9
s Carefully remove the two O-rings.
: Clean them and grease them very sparingly with UNISILKON L250L.
: Check the distr
i
butor for damage.
Replace the distributor if it is damaged (see
servicing instructions).
9
: Wipe the distributor using a lint-free cloth moistened with ethyl alcohol.
9
The front part of the distributor (the side without the ball catch) may also be softened in ethyl al-
cohol. 9
9
: Blow through with compressed air.
9
d Check that the ball catch moves easily.
Replace the entire distributor if it does not move easily
.
f Place the clean distributor an
d the lightly greased O-rings on a clean surface.
9
9
9
9
9
9
9
9
9
9