00195094-0202-MM-D3_EN.pdf - 第68页
10 Annual maintenance work SIPLACE D3 08/2008 US Edition 68 10
SIPLACE D3 10 Annual maintenance work
08/2008 US Edition
67
Function test of used tape cutter 10
a Introduce a DIN A3 sheet of paper or two DIN A4 sheet
s stuck together into the used tape
channel.
10
One DIN A4 sheet on its own is too short to reach the tape cutter. 10
10
10
s Use adhesive tape to stick the sheet(s) to the used tape channel.
10
Make sure that no paper protrudes into the traveling range of the placement head. 10
10
10
d Log on to the station as a service engineer and start SITEST.
d In the taskbar, click on the Component tables button.
d In the view that appears, click on "Activate tape cutter".
10
: Remove the sheet of paper from the used tape channel.
Contact your Regional Service Center if it is not cut through cleanly.
10
10
10 Annual maintenance work SIPLACE D3
08/2008 US Edition
68
10
SIPLACE D3 10 Annual maintenance work
08/2008 US Edition
69
Grease the linear guides for the X and Y axes 10
10
a Turn the grease gun counter-clockwise to open.
10
s Pull back the grease gun plunger.
It must lock into place.
10
10
Greasing of the SIPLACE machines is to be carried out machine specific: for SIPLACE D1 / D2
and D4 machines use ISOFLEX TOPAS NCA 52, for the SIPLACE D3 use Klüberp-
lex BEM 34-132. 10
10
d Fill the grease gun with Klüberplex BEM 34-132 grease.
10
New grease guns are filled with grease. 10
10
10
: Turn the grease gun clockwise to close.
10
f Release the lock.
The spring force moves the plunger forward.
10
g Push back the ball on the vent screw to vent the grease gun.
10
Vent the grease gun after greasing each machine. 10
10
10
: Press the trigger until the grease emerges.
The grease gun is now ready for use.
10
10
10
10