00195094-0202-MM-D3_EN.pdf - 第27页
SIPLACE D3 6 Weekly maintenance jobs 08/2008 US Edition 27 Empty the component drawer or f lap of the 8 mm S feeder modules 6 : Unplug the 8 mm S feeder and lif t it off the co mponent t able. 6 a Remove loose component …
6 Weekly maintenance jobs SIPLACE D3
08/2008 US Edition
26
. 6
SIPLACE D3 6 Weekly maintenance jobs
08/2008 US Edition
27
Empty the component drawer or flap of the 8 mm S feeder modules 6
: Unplug the 8 mm S feeder and lift it off the component table.
6
a Remove loose components from the changeover table with a brush or using the vacuum
cleaner.
s Empty the compo
nent drawer of the 2x8 mm S feeder module (if present).
d Open the flap of the 3x8 mm S feeder module (if present) and remove the components.
6
f Wipe the base of the feeder module to remove any dirt.
6
g Cut off the used tape so that it is flush with the feeder.
: Return the feeder modules to their original (correct) locations.
6
Make sure that the feeder is seated firmly on the component table and is inserted at the right po-
sition. 6
6
6
6
: Close the protective cover.
: Repeat these tasks for the other locations.
6
6
7 Monthly maintenance jobs SIPLACE D3
08/2008 US Edition
28
7 Monthly maintenance jobs
7