3OM-1751-002w_G5S.pdf - 第233页
3OM-1751 2-65 1303-001 [4] Contrast and Brightness The brightness of the image captured by the component recognition camera can be adjusted. • Default Contrast : 102 Brightness : 128 Note (a) The larger the value for &qu…
3OM-1751
2-641303-001
[2] Z (Angle) [Ang]
Set the parameters representing the angular deviations in the scanning
coordinates of the component recognition cameras based on the machine
reference X/Y coordinates (Xm-Ym).
When the camera scanning coordinates are shifted counterclockwise to the
machine reference X/Y coordinate system, a plus sign must be afxed to
each offset data.
Xm(+)
Ym(+)
Xc(+)
Yc(+)
Xc(+)
Yc(+)
Angle of Component Recognition
Camera
Angle of Component Recognition
Camera
Component Recognition
Camera
Component Recognition
Camera
Pm. Machine Reference
Coordinate Origin
Xm-Ym
Xc-Yc
: Machine Reference
Coordinate System
: Component Recognition
Camera Coordinate System
F3B64
[3] Mag. X (Horizontal) and Y (Vertical) [0.01 µm/pixel]
Set how many micrometers should be equivalent to one pixel to specify the
magnication of the component recognition camera.
This offset value is calculated automatically by means of the teaching
operation using the magnication measuring jig.
•
Default
: 6060
2.9 "Comp. Recog" Window
3OM-1751
2-651303-001
[4] Contrast and Brightness
The brightness of the image captured by the component recognition camera
can be adjusted.
•
Default
Contrast
: 102
Brightness
: 128
Note
(a) The larger the value for "Contrast" is, the stronger the chromaticness
becomes.
(b) The larger the value for "Brightness" is, the brighter the whole view
becomes.
2.9 "Comp. Recog" Window
3OM-1751
2-661303-001
2.9.2 "Comp. Recog Light" Tab Sheet
[1]
[2]
F3B65
[1] Back Light
Set the light level for Comp. Recog Light.
[2] Front 1 (Up), (Cn), (Dn)
Front 2
Front 3 (Up), (Dn)
Set the light level for Comp. Recog Light.
2.9 "Comp. Recog" Window
Graphic
Development