3OM-1751-002w_G5S.pdf - 第47页

Safety Precautions Safe-36 1OM-1751 1303-001 6. Precautionary Items for Correct Operations

100%1 / 268
Safety Precautions
Safe-35
1OM-1751
1303-001
6. Precautionary Items for Correct Operations
Power Failure
Instantaneous voltage drop due to power failure or lightning will cause the built-in computer
to break down and the basic and application programs to corrupt.
It is recommended that a DC uninterruptive power supply be used as a countermeasure
against instantaneous voltage drop.
Built-In Computer
A computer is built in the machine and used to control each internal mechanism of the
machine, save various data, and realize a user interface.
When the power switch of the machine is turned off while the computer is working (computer
being accessed), the computer may break down, causing the stored data and application
programs to corrupt.
Refer to "4.2 Power OFF" in "Chapter 2 (Vol. 1: Guide)" for how to turn off the power
switch of the machine.
Note on Startup Operation (Running-In Operation)
After the machine has been stopped for a long period of time, perform a running-in
operation for approximately 30 minutes to smoothly start up the machine.
Reference
Refer to "6. Running-In Operation" in "Chapter 3 (Vol. 1: Guide)" for the detailed
information on the running-in operation.
Safety Precautions
Safe-36
1OM-1751
1303-001
6. Precautionary Items for Correct Operations
3OM-1751
Cont-2
Contents
Page
1303-001
Chapter 1 Menus for Maintenance
1. Outline of Menus for Maintenance ................................................. 1-1
2. "MAINTENANCE" Menu................................................................. 1-3
3. "Unit Change" Window ................................................................... 1-5
3.1 Head Unit ................................................................................ 1-7
3.1.1 Attached Head Judgment Window ................................ 1-8
3.2 Nozzle Stocker ........................................................................ 1-9
3.3 Feeder Unit ............................................................................. 1-11
4. "Unit Adj." Submenu ....................................................................... 1-13
4.1 "NOZ. CHNG." Window .......................................................... 1-14
4.2 "LINE MEAS" Window ............................................................ 1-18
4.2.1 "Log Demand" Tab Sheet .............................................. 1-19
4.2.2 "Dtct.Test" Tab Sheet ..................................................... 1-21
4.2.3 "CompenDt Read" Tab Sheet ........................................ 1-24
4.3 "CONVEYOR" Window ........................................................... 1-25
4.3.1 "Conveyor" Tab Sheet ................................................... 1-26
4.3.2 "PCB Stpr." Tab Sheet ................................................... 1-28
5. "Shipment Adj." Window ................................................................. 1-29
5.1 "NL-Axis Org Master Noz Lv" Window .................................... 1-32
5.2 "Pick-up Lv NozStkLv Set" Window ........................................ 1-34
5.3 "Shute LV" Window (Shipment/exchange) .............................. 1-35
5.4 "Cmp Recog Light" Window .................................................... 1-36
5.5 "PCB Recog Light" Window .................................................... 1-40
5.6 "MARK LIGHT" Window ......................................................... 1-43
5.7 "Cmp Recog Mag" Window .................................................... 1-44
5.8 "PCB Recog/Beam" Window .................................................. 1-47
5.9 "Cmp Recog Pos" Window ..................................................... 1-49
5.10 "Head Rotate Axis" Window .................................................... 1-52
5.11 "Head Cntr Mark Pos" Window ............................................... 1-54
5.12 "Fly Recog Camr" Window ..................................................... 1-58
5.13 "Noz Stk Pos" Window ............................................................ 1-60
5.14 "Noz Incln" Window ................................................................ 1-62
5.15 "Noz Lv./Pos." Window ........................................................... 1-64
5.16 "Support pin Pos" Window ...................................................... 1-67