3OM-1751-002w_G5S.pdf - 第67页
3OM-1751 1-13 1303-001 4. "Unit Adj." Submenu [1] F3A13 [1] "Unit Adj." submenu The following buttons are arranged on this submenu bar and can be used to display the operation windows for execution of…
3OM-1751
1-12
[3] Teach
[Traverse Axis Draw] Button
Using this button, the traverse drawing operation offset teaching for each
machine is performed by teaching the mark position located on the traverse
chuck claw section.
Note
For this operation, the traverse drawing teaching pin is required separately.
[Tray Transfer Tch] Button
Using this button, the tray pallet delivery teaching is performed.
After attaching the multi-layer tray feeder to the main machine, select the
delivery teaching.
If this teaching operation is not performed, the pallet will not be delivered
correctly to the traverse cart.
Reference
Refer to "Chapter 3: Maintenance Menu" in Volume 7 for details.
1303-001
3.3 Feeder Unit
3OM-1751
1-131303-001
4. "Unit Adj." Submenu
[1]
F3A13
[1] "Unit Adj." submenu
The following buttons are arranged on this submenu bar and can be used
to display the operation windows for execution of each unit adjustment
function.
Function Selection Buttons Description
Noz Chng.
When pressed, this button opens the "NOZ. CHNG." window,
enabling you to manually perform a cycle of the vacuum nozzle
attachment and storage operation.
Line Meas
When pressed, this button opens the "LINE MEAS" window, enabling
you to view and record the changes in E/NR traces (expressed by a
chart or using numerical values) of the linear measure sensors on each
placement head. "E/NR" stands for "Light Emitted and Not Received".
Tray
This button is used when the tray feeder (option) is to be adjusted.
Cnvr.
This button is used for the adjustment operation for the conveyor
width overall setup or manual setup.
T3A1
Graphic
Development
4. "Unit Adj." Submenu
3OM-1751
1-141303-001
4.1 "NOZ. CHNG." Window
The nozzle attachment and housing can be performed manually.
[1] [2] [4]
[5]
[3]
F3A14
[1] Head Sel
When a button is pressed, the corresponding head is selected as an object one
for nozzle change operation.
[2] Nozzle Allocation No. Selection Buttons
When a button is pressed, the corresponding nozzle to be changed is selected.
The background color of the button turns light blue.
ID of Attached Vacuum Nozzle
Nozzle Stocker Address
(Home Address for Attached Nozzle)
Notice
No nozzles can be allocated to both sides of the middle-size odd
shaped nozzle if attached.
Note
The indications in the window vary depending on the selected head.
[3] Status Indication
Displayed is the condition of the currently selected head.
Graphic
Development
4.1 "NOZ. CHNG." Window