3OM-1751-002w_G5S.pdf - 第97页
3OM-1751 1-43 1303-001 5.6 "MARK LIGHT" Window [1] [2] F3A32 [1] T eaching Data Display Section Displayed are the offset data items for eac h reference mark for the designated camera. [2] T eaching Procedure Di…
3OM-1751
1-421303-001
·
Teaching Procedure
Note
Before performing the teaching operation, press the [ZERO] button in the
"Control" menu to zero all axes.
Procedure
(1) Select the camera for which the teaching is performed in the "Select Camera"
section.
(2) Select the block where the jib is setup in the "Select Jig" section.
(3) Press the [XY Beam Save Pos] button and within 10 seconds, press the
[START] button on the operation panel.
Note
The lock for the transparent cover is undone automatically.
(4) Open the transparent cover. Then, turn up the white side of the teaching
glass jig and set up the PEC recognition lighting teaching jig on the PEC
recognition camera.
(5) Press the [Jig Set Conf] button.
(6) Close the transparent cover and press the Cover Lock Switch ([Cover Ready]
button) on the main machine.
(The transparent cover will be locked).
(7) Press the [Teach Start] button.
(The PEC recognition camera will move onto the PEC recognition lighting
teaching jig to perform the teaching operation on lighting.)
(8) Press the [Beam Evac Move] button and within 10 seconds, press the [START]
button on the operation panel.
Note
The lock for the transparent cover is undone automatically.
(9) Open the transparent cover in the corresponding block.
(10) Remove the setup PEC recognition lighting teaching jig.
Notice
Unless the lighting teaching jigs are removed, the head would be
damaged.
(11) Close the transparent cover and press the Cover Lock Switch ([Cover Ready]
button).
(12) Press the [Jig Detac Conrm.] button.
(13) Press the [Save] button to save the teaching results.
5.5 "PCB Recog Light" Window
3OM-1751
1-431303-001
5.6 "MARK LIGHT" Window
[1]
[2]
F3A32
[1] Teaching Data Display Section
Displayed are the offset data items for each reference mark for the designated
camera.
[2] Teaching Procedure Display Area
Displayed are the buttons to be used for the teaching operations.
Select camera
Each PEC recognition camera in the graphic image of the machine is
provided with a button function. Select the camera in the block for which the
teaching operation is performed.
[Teach Start] button
When pressed, this button executes the teaching operation.
[Save] button
When this button is pressed, the teaching results are saved.
·
Teaching Procedure
Procedure
(1) Select the component recognition camera for which the teaching is
performed, in the "Select Camera" section.
(2) Press the [Teach Start] button.
(In a single teaching operation, the marks in the rear and front of the
designated component recognition camera are taught one by one).
(3) Press the [Save] button.
Graphic
Development
5.6 "MARK LIGHT" Window
3OM-1751
1-441303-001
5.7 "Cmp Recog Mag" Window
The corresponding window enables you to perform a teaching operation on the
magnication of the Component recognition camera.
[1]
[2]
F3A33
[1] Teaching Data Display Section
Displayed are the magnications for the designated camera and head.
[2] Teaching Procedure Display Area
Displayed are the buttons to be used for the teaching operations.
Select camera
Each component recognition camera in the graphic image of the machine is
provided with a button function. When a button is pressed, the corresponding
component recognition camera is selected as an object one for the teaching
operation.
Select head
In this section, the buttons showing the component recognition cameras
corresponding to each head are displayed as images.
Select the component recognition camera for which the teaching is
performed.
[Jig Attach Pos Move] button
Using this function, the head is moved to the position where the
magnication teaching glass jig is easily attached.
Graphic
Development
5.7 "Cmp Recog Mag" Window