3OM-1751-002w_G5S.pdf - 第91页
3OM-1751 1-37 1303-001 [4] T eaching Procedure Display Area Displayed are the buttons to be used for the teaching operations. Select camera Each camera in the graphic image of the machine is provided with a button functi…
3OM-1751
1-361303-001
5.4 "Cmp Recog Light" Window
The corresponding window enables you to perform a teaching operation on the
lighting of the component recognition camera.
[1]
[2]
[4]
[3]
F3A27
[1] Camera Selection Tab
When either of the tabs is selected, the camera to be taught is selected.
[2] Teaching Data Display Section
Displayed are offset data items for each lighting pattern for the designated
camera.
[3] Lighting Pattern Selection
The lighting pattern is selected from the following items.
[White Down] Button
"REFLD 1,3 PATT", "REFLD 1 (UP)", "REFLD1 (MID)", "REFLD 1
(DOWN)", "REFLD 3 (UP)", "REFLD 3 (DOWN)"
[Specular Down] Button
"REFLD 2"
[White Down High Jig Stand] Button
"PEN"
Graphic
Development
5.4 "Cmp Recog Light" Window
3OM-1751
1-371303-001
[4] Teaching Procedure Display Area
Displayed are the buttons to be used for the teaching operations.
Select camera
Each camera in the graphic image of the machine is provided with a button
function. When a button is pressed, the corresponding camera is selected for
the teaching operation
[XY Beam Save Pos] Button
When pressed, this button moves the XY beam to the escape position.
[Jin Set Conf]
This button is used to conrm the jig attachment.
[Teach Start] Button
When pressed, this button performs the teaching operation for the selected
camera.
[Jig Detach Conf]
This button is used to conrm the jig removal.
[Save] Button
When this button is pressed, the teaching results are saved.
5.4 "Cmp Recog Light" Window
3OM-1751
1-381303-001
•
Teaching Jig for Component Recognition Camera Lighting
The following jig components are used for the teaching on the component
recognition camera lighting. Before the teaching, combine the jig with the
teaching glass jig mounting support jig and place it on the PEC recognition
camera. After the teaching operation, remove it.
Teaching Glass Jig Mounting Support Jig 1
Teaching Glass Jig
Teaching Glass Jig Mounting Support Jig 2 (High Base Jig)
(JG-0287,KYF-M8840-00)
(JG-0286,KYF-M8830-00)
F3A28
Notice
Set-up the teaching glass jig mounting support jig securely so that it does
not rise.
If the mounting condition is not satisfactory, the head, etc., might be
damaged.
•
Teaching Jig Set-up Diagram
Mirror Plane turned down and Tall Jig used
White Down Specular Down
F3A29
5.4 "Cmp Recog Light" Window