JX-100_SPE_EN06.pdf - 第23页

19 6. OPTIONAL FEEDERS 6.1 Component supply method Front bank fixing type (to be installed as st andard) Rear bank fixing type (option) 6.2 Maximum Number of Types Description A number of available places at the front si…

5.2.10 A simple Buffer (Option only for JX-100)

Attaches a stopper onto the conveyor entrance to make the simplified IN-buffer. It makes

the waiting time to load the next PWB shorter.

5.2.11 Lighting unit of solder recognition (Option for the factory setting only

for JX-100 LED)

A solder printed on a board can be used as a PWB reference mark.

Even if the PWB reference mark cannot be recognized around the edge of PWB due to

the feeds that are done by split clamping in a production of longer-sized PWB in X axis,

more than 410 mm in X direction, the solder printed on a board can be used as the

replacement of a PWB reference mark, and it enables a PWB production in placement.

*Satisfactory placement accuracy might not be obtained in the solder print because

shape as the mark is not clear.

6. OPTIONAL FEEDERS

6.1 Component supply method

Front bank fixing type (to be installed as standard)

Rear bank fixing type (option)

6.2 Maximum Number of Types

Description

A number of

available

places at the

front side

(Note 3)

A number of available

places at the rear

side (option)

(Note 1,2,3)

Total number of

units that can be

installed (at rear

option setting)

Number of

occupied

positions

8 mm tape feeder 30 30 60 2

12 mm tape feeder 20 20 40 3

16 mm tape feeder 20 20 40 3

24 mm tape feeder 15 15 30 4

32 mm tape feeder (Note 2) 12 12 24 5

44 mm tape feeder 7 7 14 8

56 mm tape feeder 7 7 14 8

72 mm tape feeder 6 6 12 10

Stick feeder type N 20 － 20 3

Stick feeder type W 10 － 10 6

Bulk feeder 30 － 30 2

Tray holder Type 1 (Note 4) － 1 1 40

Tray holder Type 2 (Note 4) － 2 2 20

Note 1: At the rear side ATF is not available.

Note 2: Not available 32mm adhesion feeder type.

Note 3: The simultaneous pickup and pickup rate are guaranteed by the CTF and ATF.

However, the pickup position must be obtained automatically (auto teaching) and

the teaching of the emboss tape must be carried out. Note 3

Note 4: The pick-up range of Y-direction of the tray holder is 230mm (120 mm for JX-100

LED) or less.

6.3 A List of Feeders

Feed unit

Tape feeder

8mm, 12mm

16mm, 24mm

32mm, 44mm

56mm, 72mm

Bulk feeder Condenser of 1005

Condenser of 1608

Resistance of 1608

Stick feeder

Type N

Type W

Tray holder

Type 1 (Note 1)

Type 2 (Note 1)

Note 1: Rear bank only

6.4 Tape Feeder

6.4.1 CTF

1) List of specifications

Tape type

Product

code

Paper Embossed

Feeding pitch

Number of pins

at the edge

Diameter of a

reel

Typical component

type

CF03HP

○ －

0603

CF05HP

○ －

1005

CF08HE

－ ○

2mm

Two-terminal diode

CF081P

○ －

1608, 2012, 3216

CF081E

－ ○

Φ180mm

SOT

CF8L1P

○ －

1608, 2012, 3216

CF8L1E

－ ○

4mm

Two

Φ180 −

380mm

SOT

CN05HP

○ －

1005

CN08HE

－ ○

2mm

Two-terminal diode

CN081P

○ －

1608, 2012, 3216

CN081E

－ ○

Φ180mm

SOT

CN8L1P

○ －

1608, 2012, 3216

CN8L1E

－ ○

4mm

One

Φ180 −

380mm

SOT

* For a tape feeder designed for both paper and embossed paper, contact our sales

person.

* Use a tape feeder whose supported component sizes and tape specifications conform to

the JIS C0806-3:1999 and IEC 60286-3:2007.

2) Common specifications

Power supply/air supply None

C*0*** L=602mm, H=205mm, W=16.2mm

Dimensions

C*8L1* L=683mm, H=431mm, W=16.5mm

C*0*** 1.5kg (Excluding a reel)

Mass

C*8L1* 1.9kg (Excluding a reel)

Component transport method Ratchet drive system

3) Options

① Bar code tag

This tag is used to paste a bar code mark onto the rear edge of a tape feeder.

Even after you install a tape feeder on the feeder bank, the pasted bar code can be

read easily.

② Embossed tape spacer

This spacer is to be attached on the bottom side of a carrier tape to improve the

feeding capability and component pick-up stability of a carrier tape for embossed

components whose materials is soft and inelastic.

③ Tape reel mounting platform

This is a platform that allows you to set a tape onto a tape feeder. Since you can set

a tape while holding a tape feeder correctly, this option improves the tape setting

capability and prevents a tape feeder from falling down.

Type Application

Tape reel mounting platform

(no foot)

A user is supposed to fix this option onto a table or similar device

with screws.

Tape reel mounting platform

(with foot)

This option is equipped with foot, so you can install this option as

desired.