JX-100_SPE_EN06.pdf - 第24页

6.4 Tape Feeder 6.4.1 CTF 1) List of specifications T ape type Product code Paper Embossed Feeding pitch Number of pins at the edge Diameter of a reel T ypical component typ e CF03HP ○ － 0603 CF05HP ○ － 1005 CF08HE － ○ 2…

100%1 / 40
19
6. OPTIONAL FEEDERS
6.1 Component supply method
Front bank fixing type (to be installed as standard)
Rear bank fixing type (option)
6.2 Maximum Number of Types
Description
A number of
available
places at the
front side
(Note 3)
A number of available
places at the rear
side (option)
(Note 1,2,3)
Total number of
units that can be
installed (at rear
option setting)
Number of
occupied
positions
8 mm tape feeder 30 30 60 2
12 mm tape feeder 20 20 40 3
16 mm tape feeder 20 20 40 3
24 mm tape feeder 15 15 30 4
32 mm tape feeder (Note 2) 12 12 24 5
44 mm tape feeder 7 7 14 8
56 mm tape feeder 7 7 14 8
72 mm tape feeder 6 6 12 10
Stick feeder type N 20 － 20 3
Stick feeder type W 10 － 10 6
Bulk feeder 30 － 30 2
Tray holder Type 1 (Note 4) － 1 1 40
Tray holder Type 2 (Note 4) － 2 2 20
Note 1: At the rear side ATF is not available.
Note 2: Not available 32mm adhesion feeder type.
Note 3: The simultaneous pickup and pickup rate are guaranteed by the CTF and ATF.
However, the pickup position must be obtained automatically (auto teaching) and
the teaching of the emboss tape must be carried out. Note 3
Note 4: The pick-up range of Y-direction of the tray holder is 230mm (120 mm for JX-100
LED) or less.
6.3 A List of Feeders
Feed unit
Tape feeder
8mm, 12mm
16mm, 24mm
32mm, 44mm
56mm, 72mm
Bulk feeder Condenser of 1005
Condenser of 1608
Resistance of 1608
Stick feeder
Type N
Type W
Tray holder
Type 1 (Note 1)
Type 2 (Note 1)
Note 1: Rear bank only
6.4 Tape Feeder
6.4.1 CTF
1) List of specifications
Tape type
Product
code
Paper Embossed
Feeding pitch
Number of pins
at the edge
Diameter of a
reel
Typical component
type
CF03HP
○ －
0603
CF05HP
○ －
1005
CF08HE
－ ○
2mm
Two-terminal diode
CF081P
○ －
1608, 2012, 3216
CF081E
－ ○
Φ180mm
SOT
CF8L1P
○ －
1608, 2012, 3216
CF8L1E
－ ○
4mm
Two
Φ180 −
380mm
SOT
CN05HP
○ －
1005
CN08HE
－ ○
2mm
Two-terminal diode
CN081P
○ －
1608, 2012, 3216
CN081E
－ ○
Φ180mm
SOT
CN8L1P
○ －
1608, 2012, 3216
CN8L1E
－ ○
4mm
One
Φ180 −
380mm
SOT
* For a tape feeder designed for both paper and embossed paper, contact our sales
person.
* Use a tape feeder whose supported component sizes and tape specifications conform to
the JIS C0806-3:1999 and IEC 60286-3:2007.
2) Common specifications
1
Power supply/air supply None
C*0*** L=602mm, H=205mm, W=16.2mm
2
Dimensions
C*8L1* L=683mm, H=431mm, W=16.5mm
C*0*** 1.5kg (Excluding a reel)
3
Mass
C*8L1* 1.9kg (Excluding a reel)
4
Component transport method Ratchet drive system
3) Options
① Bar code tag
This tag is used to paste a bar code mark onto the rear edge of a tape feeder.
Even after you install a tape feeder on the feeder bank, the pasted bar code can be
read easily.
② Embossed tape spacer
This spacer is to be attached on the bottom side of a carrier tape to improve the
feeding capability and component pick-up stability of a carrier tape for embossed
components whose materials is soft and inelastic.
③ Tape reel mounting platform
This is a platform that allows you to set a tape onto a tape feeder. Since you can set
a tape while holding a tape feeder correctly, this option improves the tape setting
capability and prevents a tape feeder from falling down.
Type Application
Tape reel mounting platform
(no foot)
A user is supposed to fix this option onto a table or similar device
with screws.
Tape reel mounting platform
(with foot)
This option is equipped with foot, so you can install this option as
desired.
20
6.4.2 CTFR
1) List of specifications
Tape type
Product
code
Paper Embossed
Feeding pitch
Number of pins
at the edge
Diameter of a
reel
Typical component
type
CF03HPR
○ －
0603
CF05HPR
○ －
1005
CF08HER
－ ○
2mm
Two-terminal diode
CF081PR
○ －
1608, 2012, 3216
CF081ER
－ ○
Φ180mm
SOT
CF8L1PR
○ －
1608, 2012, 3216
CF8L1ER
－ ○
4mm
Two
Φ180 −
Φ380mm
SOT
CN05HPR
○ －
1005
CN08HER
－ ○
2mm
Two-terminal diode
CN081CR ○ ○
Φ180mm
1608, 2012, 3216
CN8L1CR ○ ○
4mm
One
Φ180 −
Φ380mm
1608, 2012, 3216
* For a tape feeder designed for both paper and embossed paper, contact our sales
person.
* Use a tape feeder whose supported component sizes and tape specifications conform to
the JIS C0806-3:1999 and IEC 60286-3:2007.
2) Common specifications
1
Power supply/air supply None
C*0***R L=602mm, H=208mm, W=16.2mm
2
Dimensions
C*8L1*R L=683mm, H=431mm, W=16.5mm
C*0***R 1.2kg (Excluding a reel)
3
Mass
C*8L1*R 1.9kg (Excluding a reel)
4
Component transport method Ratchet drive system
3) Options
① Bar code tag
This tag is used to paste a bar code mark onto the rear edge of a tape feeder.
Even after you install a tape feeder on the feeder bank, the pasted bar code can be
read easily.
② Tape reel mounting platform
This is a platform that allows you to set a tape onto a tape feeder. Since you can set
a tape while holding a tape feeder correctly, this option improves the tape setting
capability and prevents a tape feeder from falling down.
Type Application
Tape reel mounting platform
(no foot)
A user is supposed to fix this option onto a table or similar device
with screws.
Tape reel mounting platform
(with foot)
This option is equipped with foot, so you can install this option as
desired.
21