00191174-01.pdf - 第26页
1 General Functions User’s Manual Test P rogram SITEST 1.7 Teach Menu Software Version 10.xx Edition 03/98 1 - 14 1.7 Tea ch Me nu The Teac h menu p ermits the man ual traver sing of th e acti ve gantr y. ● From the m ai…
User’s Manual Test Program SITEST 1 General Functions
Software Version 10.xx Edition 03/98 1.6 "Miscellaneous" Menu
1 - 13
Overview of the Functions:
-
None Select if no ceramic substrate centering is available
-
Mechanical Select if a mechanical ceramic substrat centering feature is installed
-
Optical (PCB-camera) Select if an optical ceramic substrat centering feature is installed
-
Both Select if mech. and opt. ceramic substrat centering features are installed
●
Select the desired option and press the RETURN key. The selected option is displayed on the screen.
●
Press the ESC key to return to the "Machine-Config." menu.
Configuration of the "4 x 5" IC Nozzle Changer
●
Select the
4x5 IC-Noz. Changer
menu option and press the RETURN key.
The "4x5 IC-Noz. Changer" menu is displayed on the screen
●
Select the
Change
menu function if you wish the "4 x 5" IC nozzle changer to be added to the machine
configuration, and press the RETURN key.
●
Press the ESC key three times to return to the SITEST main menu.
NOTE
The default values of the nozzle changer will be accepted by the system when the
Store MA-file
menu function is selected (see section 1.3).
Following the acceptance of the default values, the nozzle changer must be recalibrated.
Options
Display files
Versions description
Clear screen
Display file
Configuration
Operation parameter
Machine-Config.
Type of conveyor
Transport mode
Ceramic s. centering
4x5 IC-Noz. Changer
Miscellaneous
Machine-Config.
Change
Abort
4x5 IC-Noz. Changer
1 General Functions User’s Manual Test Program SITEST
1.7 Teach Menu Software Version 10.xx Edition 03/98
1 - 14
1.7 Teach Menu
The Teach menu permits the manual traversing of the active gantry.
●
From the main menu select the Teach menu option and press the RETURN key.
The "Teach menu" is displayed on the screen.
●
Select the Teach gantry positions function and press the RETURN key.
●
Actuate the cursor keys to move the gantry.
NOTE
If you are positioned in front of the machine viewing in the direction of travel, the cursor keys correspond
to the direction of travel of the gantry. The step size for traversing the gantry can be adjusted using
numeric keys 0 to 9, with key "0" representing the smallest and "9" the largest step size.
The taught positions are displayed on the screen.
●
Press the ESC key twice to return to the SITEST main menu.
Teach menu
Teach gantry positions
User’s Manual Test Program SITEST
Software Version 10.xx Edition 03/98
2 - I
Contents
Page
Functions for the Adjustment of the Machine
2.1 Axis Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 1
2.2 Functions of the Motor Control Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 6
2.3 Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 8
2.3.1 Conveyor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 9
2.3.2 CRDL Tester. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 10
2.3.3 Component Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 11
2.3.4 Width Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 13
2.3.5 Determination of the Position of the Movable Conveyor Side . . . . . . . . . . . . . . . . . . . . . . . 2 - 14
2.4 Vacuum Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 14
2.5 Continuous Run . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 15