00191174-01.pdf - 第60页

3 Calibration Functions User’s Manual Test Program S ITEST 3.7 Measuring the Position of the P CB Reference Corner Software Version 10.xx Edition 03/98 3 - 12 3.7 Meas uring the Position of the PCB Refere nce Corner NOTE…

User’s Manual Test Program SITEST 3 Calibration Functions

Software Version 10.xx Edition 03/98 3.6 Measuring the Pick-Up Positions of Tracks 1 and 120

3 - 11

Tr. 120 no positioning to determine the position of the measuring hold in the setting gauge and to save the

values determined as the pick-up position of track 120

(The PCB camera must first be taught over measuring hole of the setting gauge).

Pos.calibration tool to calibrate the calibration piece position (on SIPLACE 80S only possible with

gantry 1)

Fixed PCB corner

to calibrate the PCB reference corner position

(on SIPLACE 80S only possible with gantry 1)

●

Select the

Machine zero-point

function, press the RETURN key and the START button.

The calibration of the machine zero point is performed.

●

Press the ESC key twice to return to the SITEST main menu.

●

Save the data of the calibrated machine zero point using the

File Manager

Store MA-file

menu function

(see section 1.3).

3.6 Measuring the Pick-Up Positions of Tracks

1 and 120

NOTE

Verify that the calibration data for the component camera, PCB camera, PCB/component camera offset and

the machine zero point have already been determined.

●

Place the setting gauge onto track 1 or 120 of the component table to be measured.

NOTE

Check the component table beforehand for any unevenness or contamination.

●

From the main menu select the

Gantry positions

option and press the RETURN key.

The "Gantry positions" menu is displayed on the screen.

●

From the "Gantry positions" menu select the

Calibrate

option and press the RETURN key. The "Calibrate"

menu is displayed on the screen.

●

Depending on the position of the setting gauge on the component table, select function

Track 1

Track

120

, press the RETURN key and the START button. The calibration of the selected track is performed.

●

Proceed in the same way for the other track.

NOTE

The feeder location "1" (or "2" where a WPC is installed) of the SIPLACE 80F system cannot be measured

automatically owing to the fact that the tracks of this feeder location cannot be approached by the PCB

camera on account of the traversing range of the gantry being too small.

●

Press the ESC key twice to return to the SITEST main menu.

3 Calibration Functions User’s Manual Test Program SITEST

3.7 Measuring the Position of the PCB Reference Corner Software Version 10.xx Edition 03/98

3 - 12

3.7 Measuring the Position of the PCB Reference

Corner

NOTE

Verify that the calibration data for the PCB camera, PCB/component camera offset and the machine zero

point have already been determined.

●

Load a PCB with a light surface into the center conveyor using the Functions --> Conveyor --> PCB in to

stopper menu options.

●

Press the ESC key repeatedly until only the SITEST main menu is displayed.

●

From the main menu select the Gantry positions option and press the RETURN key.

The "Gantry positions" menu is displayed on the screen.

●

Select the Calibrate menu item and press the RETURN key.

The "Calibrate" menu is displayed on the screen.

●

Select the Fixed PCB corner I function, press the RETURN key and the START button.

The PCB camera moves over the position of the PCB reference corner I.

The monitor switches to the PCB camera.

●

Teach the PCB reference corner position

using the cursor keys

↑↓ ← →

(For details on the procedure for traversing the gantry during teaching, see section 0.4.1).

●

Terminate the teaching operation by pressing the ESC key.

The monitor switches back to the normal program mode, and the current position is adopted as the refe-

rence corner position.

●

Press the ESC key twice to return to the SITEST main menu.

●

Transport the PCB into the output conveyor using the Functions --> Conveyor --> PCB out menu

options.

●

Press the ESC key twice to return to the SITEST main menu.

NOTE

Only

the values for "Zero point cor. value", "Minimal position" and "Maximal position" that were modified in

the "Positions" input menu can be saved with the aid of the main menu option File Manager --> Store

MA-file. All other modified axis data cannot

be saved. They will be reset to the original values upon exiting

from the SITEST program

User’s Manual Test Program SITEST 3 Calibration Functions

Software Version 10.xx Edition 03/98 3.8 Calibration of the IC-Camera (SIPLACE 80F)

3 - 13

3.8 Calibration of the IC-Camera (SIPLACE 80F)

●

Carry out the preparatory steps proceeding as described in section 3.1 and section 3.1.1.

●

From the "Vision system" menu select the

IC-camera

option and press the RETURN key.

The "IC-camera" menu is displayed on the screen.

Overview of the Functions:

Move to by pcb-cam. to approach the calibration piece position with the PCB camera

Move to by IC-head to approach the calibration piece with the IC-head (nozzle "416" or "417")

IC-ca.pos & offset to determine the camera position in x and y-directions and determination of the

distance between IC-nozzle and the component camera.

Calibrate IC-camera to calibrate the IC-camera

Illumination test menu for the performance of the illumination test

Illumination for GF not available

Meas.focus camera Menu for measuring the focus position of the of the IC-camera

Illumination values to display the illumination values "steep", "middle" and "flat"

Calibration factors to display the IC-camera values determined

Camera number to open the input field for the camera number

(only required for lines with HS-180)

●

From the "IC-camera" menu select the

Meas.focus camera

option and press the RETURN key.

The "Meas.focus camera" menu is displayed on the screen.

Pos.calibration tool

Adopt current pos.

Teach position

PCB-camera

Component camera

IC-camera

Flip-chip-camera

Vision system

IC-camera

Move to by pcb-cam.

Move to by IC-head

IC-ca.pos & offset

Calibrate IC-camera

Illumination test

Illumination for GF

Meas.focus camera

Illumination values

Calibration factors

Camera number

Pos.calibration tool

Adopt current pos.

Teach position

PCB-camera

Component camera

IC-camera

Flip-chip-camera

Vision system

IC-camera

Move to by pcb-cam.

Move to by IC-head

IC-ca.pos & offset

Calibrate IC-camera

Illumination test

Illumination for GF

Meas.focus camera

Illumination values

Calibration factors

Camera number

Meas.focus camera

Pick up cal. tool

Return cal. tool

Measure focus

Measure z-Delta

Focus pos. (digit)