00191174-01.pdf - 第35页

User’s Manual Test Program SITEST 2 Functions for t he Adjustment of the Machine Software Version 10.xx Edition 03/98 2.2 Functions of t he Motor Control Board 2 - 7 Overview of the Func tions: - Step sta r axis cyc ling…

2 Functions for the Adjustment of the Machine User’s Manual Test Program SITEST

2.2 Functions of the Motor Control Board Software Version 10.xx Edition 03/98

2 - 6

●

Select the

Maximum position

from the menu and press the RETURN key. The axis move to the current,

minimum position. Whenever the "Minimum position" menu item is activated, the selected axis will advance

by 200 counts. When the axis reaches the limit switch, an error will be displayed.

●

Manually move the axis away from the limit switch position.

●

Exit from the menu by pressing the ESC key.

●

Select the

Display position

menu option to view the positions and press the RETURN key.

The "Show position" menu is opened. The data of the minimum and maximum positions and the limit

switch positions are displayed and can be edited, if required.

NOTE

The minimum positions must be greater than the respective limit switch position, and the maximum posi-

tion must be smaller than the respective limit switch position.

NOTE

If the values of the minimum and maximum positions of the traversing paths are to be changed, they can

be saved to the "REAL.MA" file by way of the menu option

File manager

-->

Store MA-file

on the main

menu.

●

Press the ESC key four times to return to the SITEST main menu.

2.2 Functions of the Motor Control Board

The options of the "Motor contr. board" menu are used for testing the head functions. In the normal case, the

test is performed using the "Continuous run" function.

●

From the main menu select the

Motor contr. board

option and press the RETURN key. The "Motor contr.

board" menu is displayed on the screen.

Step star axis

Screwdriver 1

Screwdriver 2

Actuate dp 1

Actuate dp 2

Centering no measur.

Centering with meas.

Air blow placement

Air blow reject

Continuous run

Motor control board

User’s Manual Test Program SITEST 2 Functions for the Adjustment of the Machine

Software Version 10.xx Edition 03/98 2.2 Functions of the Motor Control Board

2 - 7

Overview of the Functions:

Step star axis cycling the revolver head so that it advances by one segment

Screwdriver 1 to open/close the sealing piston in the segment of the pick-up station

Screwdriver 2 to open/close the sealing piston in the segment of the rejecting station

Actuate dp 1 to swivel dp1-drive toward segment

Actuate dp 2 to swivel dp2-drive toward segment

Centering no measur. to close jaws of centering station without CRDL-testing procedure

Centering with meas. this function is not used in this software version

Air blow placement to switch the "blow air" supply at the pick-up station on/off

(serves to adjust the "blow air" in the placement circuit)

Air blow reject to switch the "blow air" supply at the reject station on/off

(serves to adjust the "blow air" in the rejecting circuit)

Continuous run to perform the continuous run using one of the functions of the motor control board

Placement circuit Menu for testing the head functions in the placement circuit

●

In order to cycle the revolver head so that it advances by one segment, select the

Step star axis

function

and press the RETURN key.

●

If you wish to execute a single function, select the desired function and press the RETURN key.

The selected function is executed.

●

If you wish to carry out a continuous run by using one of the functions of the motor control board, select the

menu option

Continuous run

and press the RETURN key.

The "Continuous run" is now displayed on the screen.

●

Select the desired function and press the RETURN key. The continuous run is executed for the selected

function until it is terminated by pressing the ESC key.

●

Press the ESC key twice to return to the SITEST main menu.

Step star axis

Screwdriver 1

Screwdriver 2

Actuate dp 1

Actuate dp 2

Centering no measur.

Centering with meas.

Air blow placement

Actuate air blow rej

Continuous run

Motor control board

Continuous run

C.r screwdriver 1

C.r screwdriver 2

C.r swivel-in dp1

C.r swivel-in dp2

C.r center no mesur

C.r center with meas

C.r air blow placement

C.r air blow reject

2 Functions for the Adjustment of the Machine User’s Manual Test Program SITEST

2.3 Functions Software Version 10.xx Edition 03/98

2 - 8

2.3 Functions

Using the options of the "Functions" menu it is possible, among others, to test conveyor and component table

functions and to determine the x and y-coordinates for every compartment of the nozzle changer. In the

following, only those functions are described that are used for adjusting or testing the machine. Calibration of

the nozzle changer and the coplanarity laser module are described in chapter 4 "Calibration Functions" of this

manual.

●

Select the Functions option from the main menu and press the RETURN key.

The " Functions" menu is displayed on the screen.

Overview of the Functions:

Conveyor Menu for checking the conveyor functions

CRDL Menu for checking the CRDL test functions

Component-table Menu for checking the component table functions

Nozzle changer Menu for calibrating the RV and IC nozzle changers

Coplanarity function Menu for calibrating the coplanarity laser module

Width adjustment Menu for adjusting the width adjustment

Movable conv. side Calibration of the conveyor width for automatic width adjustment

NOTE

If gantry 2 of a SIPLACE 80S is active (MC-AKTIV: 2), only the "Component table" and "Nozzle changer"

menu items can be selected. If SIPLACE 80 F is active, only "Component table 3" can be selected, "Compo-

nent table 1", the V24 cable is to be plugged into a different socket beforehand.

Functions

Conveyor

Component-table

Nozzle changer

Coplanarity function

Movable conv. side

Width adjustment

only available at

type SIPLACE 80F

CRDL tester