00191174-01.pdf - 第44页

2 Functions for the A djustment of the Machine User’s Manual Test Program S ITEST 2.5 Continuous Run Software Version 10.xx Edition 03/98 2 - 16 ● To perfor m a co ntinuous run of the RV-head, selec t the Enter Para mete…

User’s Manual Test Program SITEST 2 Functions for the Adjustment of the Machine

Software Version 10.xx Edition 03/98 2.5 Continuous Run

2 - 15

Print vacuum results to print the measured vacuum values

Alternate IC-vacuum to switch the vacuum for the IC-head on/off

Alternate IC air blow to switch the "blow air" supply for the IC-head on/off

Measure IC vacuum to measure the vacuum values of the IC-head

●

From the "Vacuum" menu select the desired function and press the RETURN key

The selected function is executed.

●

Press the ESC key to exit from the "Vacuum" menu.

2.5 Continuous Run

This function is designed to perform a complete head test.

NOTE

Prior to starting the continuous run, the respective placement head must have been submitted to a reference

run and the gantry must be so positioned that upon lowering the z-axis the sleeve will either make contact with

the conveyor top edge or a PCB located in the center conveyor.

●

From the main menu select the Continuous run option and press the RETURN key.

The "Continuous run" menu is displayed on the screen.

Overview of the Functions:

Ct.run RV-head to perform a continuous run of the RV-head

Cont.run IC-head to perform a continuous run of the IC-head

Ct.r. FORCE RV-head to open the start menu for the "RV-head" endurance run

Ct.r. FORCE IC-head to open the start menu for the "IC-head" endurance run

Continuous run

Ct.run RV-head

Cont.run IC-head

Ct.r. FORCE RV-head

Ct.r. FORCE IC-head

2 Functions for the Adjustment of the Machine User’s Manual Test Program SITEST

2.5 Continuous Run Software Version 10.xx Edition 03/98

2 - 16

●

To perform a continuous run of the RV-head, select the

Enter Parameter

menu option from the "Conti-

nuous run" menu and press the RETURN key.

The "Ct.run RV-head" menu is displayed on the screen.

Overview of the Functions:

Start cont. run head to start the continuous run

Display result the results of the head continuous run are read back by the machine controller and

displayed on the screen.

Print result to print the results of the head continuous run on a connected printer

Reset counter to reset the sequence and error counter

Enter head data to open the "Head data" input menu (head number, data, tester's name)

Enter parameter to open the menu for the entry of sequence parameters for the head continuous run

(z-sensor path in DIGITS, number of passes up to the reference run, number of

passes up to the vacuum check, with/without centering)

●

If you wish to enter the head data, select the

Enter head data

menu option and press the RETURN key.

The input menu is opened.

●

Enter the desired data and press the RETURN key to store the data.

●

Press the ESC key to exit from the input menu.

●

If you wish to change the parameters for the performance of the head continuous run, select the

Enter

parameter

menu option and press the RETURN key.

The input menu is opened.

●

Carry out the desired changes and press the RETURN key to store the changes.

Example: If you enter the figure "100" on the "Reference run" line, this means that the reference

point will be checked after 100 cycles of the revolver head (1 cycle = 12 incremental steps).

If you enter the figure "100" on the "Vacuumtest" line, this means that

a vacuum check will be performed after 100 cycles of the revolver head.

●

Press the ESC key to exit from the input menu.

●

Select the

Start cont. run head

function to start the head continuous run and press the RETURN key.

The continuous run continues to be executed until it is terminated by pressing the ESC key.

●

If you wish to execute another function of the "Ct.run RV-head" menu, select the desired function from the

menu and press the RETURN key

The selected function is executed.

Continuous run

Ct.run RV-head

Cont.run IC-head

Ct.r. FORCE RV-head

Ct.r. FORCE IC-head

Start cont. run head

Display result

Print result

Reset counter

Enter head data

Enter parameter

Ct.run revolver head

User’s Manual Test Program SITEST 2 Functions for the Adjustment of the Machine

Software Version 10.xx Edition 03/98 2.5 Continuous Run

2 - 17

●

Press the ESC key to exit from the "Ct.run RV-head" menu.

●

If you wish to have the RV-head perform an endurance run. select the

Ct.r. FORCE RV-head

option from the "Continuous run" menu and press the RETURN key

The "Ct.r. FORCE RV-head" menu is displayed on the screen.

Overview of the Functions:

Start cont.run FORCE to start the continuous run

Change parameter to open the menu for changing the run parameters for the endurance run

●

If you wish to change the force setting at which the continuous run is to be carried out, select the

Change

parameter

menu option and press the RETURN key.

The input menu is opened.

●

Change the force setting to the desired value and press the RETURN key to accept the change.

●

Press the ESC key to exit from the input menu.

●

To start the endurance run select the

Start cont.run FORCE

function and press the RETURN key.

The continuous run continues to be carried out until you terminate it by pressing the ESC key.

●

Press the ESC key to return to the "Continuous run" menu.

●

To perform a continous run of the IC-head, select the

Cont.run IC-head

menu option from the "Continuous

run" menu and press the RETURN key.

The "Cont.run IC-head" menu is displayed on the screen.

Overview of the Functions:

Start cont. run head to start the continuous run

Change parameter to open the menu for changing the run parameters for the head continuous run

Display result the results of the continuous head run are read back by the machine controller

and displayed on the screen.

●

If you wish to change the parameters for the execution of the continuous head run, select the

Change

parameter

menu and press the RETURN key.

The input menu is opened.

Continuous run

Ct.run revolver head

Cont.run IC-head

Ct.r. FORCE rev.head

Ct.run FORCE IC-head

Start cont.run FORCE

Change parameter

Ct.r. FORCE RV-head

Continuous run

Ct.run revolver head

Cont.run IC-head

Ct.r. FORCE rev.head

Ct.run FORCE IC-head

Start cont. run head

Change parameter

Display result

Cont.run IC-head