00191174-01.pdf - 第39页
User’s Manual Test Program SITEST 2 Functions for t he Adjustment of the Machine Software Version 10.xx Edition 03/98 2.3 Functions 2 - 11 2.3.3 Co mponent T able The func tion of i ndividua l com ponents of the co mpone…
2 Functions for the Adjustment of the Machine User’s Manual Test Program SITEST
2.3 Functions Software Version 10.xx Edition 03/98
2 - 10
2.3.2 CRDL Tester
NOTE
Prior to the performance of the CRDL functions, the CRDL calibration piece must be attached to a segment
under the mechanical centering station.
●
From the "Functions" menu select the
CRDL tester
option and press the RETURN key.
The "CRDL tester" menu is displayed on the screen.
Overview of the Functions:
-
C-compensation to perform the C-compensation and to display the compensation value
-
R-compensation to perform the R-compensation and to display the compensation value
-
L-compensation to perform the L-compensation and to display the compensation value
-
Measure C to perform the C measurement and to display to measured value
-
Measure R to perform the R measurement and to display the measured value
●
Select the desired function and press the RETURN key
.
The selected function is executed. The values determined are displayed on the screen.
●
Press the ESC key, to return to the "Functions" menu.
Functions
Conveyor
CRDL tester
Component-table
Nozzle changer
Coplanarity function
Movable conv. side
Width adjustment
C-compensation
R-compensation
L-compensation
Measure C
Measure R
CRDL tester
User’s Manual Test Program SITEST 2 Functions for the Adjustment of the Machine
Software Version 10.xx Edition 03/98 2.3 Functions
2 - 11
2.3.3 Component Table
The function of individual components of the component table can be tested with the aid of the Component
table menu.
●
From the "Functions" menu select the
Component-table
option and press the RETURN key.
The "Component-table" menu is displayed on the screen.
Overview of the Functions:
-
Single functions to test a selected function of the component table in one single operation
-
Continuous run to perform a continuous run on a selected function of the component table
-
Display version to display the version of the component table
-
Waiting time (msec) to define the waiting time when executing the "tape cutter" function in the
continuous running mode
●
In order to test a single function in one single operation, select the
Single functions
option from the
"Component-table" menu and press the RETURN key.
The "Single functions" menu is displayed on the screen.
Overview of the Functions:
-
Tape cutting unit to actuate the tape cutting unit
-
Open linear feeder testing function
-
Actuate lin. feeder to activate the linear feeder
-
Output to activate the tape feeder
-
Input to read
-
Track to enter the track number of the component of the component table for which the
function test (in Single functions or Continuous run) is to be performed
Functions
Conveyor
CRDL
Component-table
Nozzle changer
Coplanarity function
Width adjustment
Movable conv. side
Coplanarity function
Single functions
Continuous run
Display version
Waiting time (msec)
Component-table
Functions
Conveyor
CRDL
Component-table
Nozzle changer
Coplanarity function
Width adjustment
Movable conv. side
Coplanarity function
Single functions
Continuous run
Show version
Waiting time
Component-table
Single functions
Tape cutting unit
Open linear feeder
Actuate lin. feeder
Output
Input
Track
2 Functions for the Adjustment of the Machine User’s Manual Test Program SITEST
2.3 Functions Software Version 10.xx Edition 03/98
2 - 12
●
From the "Single functions" menu select the
Track
option and press the RETURN key. The "Track" input
field is opened.
●
If you wish to test, for example, a specific linear feeder, enter the number of the track on which the feeder is
set up and confirm your entry by pressing the RETURN key
.
●
Close the input field by pressing the ESC key.
●
Select the function to be tested for the component that is set up on the track entered or that can be
activated via the address of this track (e.g. "Actuate lin. feeder" for the linear feeder that is set up on the
track entered) and press the RETURN key
.
The function will now be executed once.
●
To test a single function in the continuous run mode, select the
Continuous run
option from the
"Component-table" menu and press the RETURN key.
The "Continuous run" menu is displayed on the screen.
NOTE
To test the functions "Linear feeder" and "Output" in the continuous running mode, it is necessary - prior
to
selecting the continuous run function - to first enter the number of the desired track, by selecting the "Track"
menu option from the "Single functions" menu (see above) and to confirm the entry by pressing the RETURN
key, and subsequently to actuate the ESC key twice to exit from the "Single functions" menu.
Overview of the Functions:
-
Tape cutting unit to activate the tape cutting unit
-
Open linear feeder testing function
-
Actuate lin. feeder to activate the linear feeder
-
Output to activate the tape feeder
●
Select the function to be tested for the component that is set up on the track entered or that can be activa-
ted via the address of this track and press the RETURN key
.
The function continues to be executed until the continuous run is terminated by pressing the ESC key.
●
Press the ESC key twice to return to the "Functions" menu.
Functions
Conveyor
CRDL
Component-table
Nozzle changer
Coplanarity function
Width adjustment
Movable conv. side
Flux function
Coplanarity function
Single functions
Continuous run
Display version
Waiting time
Component-table
Continuous run
Tape cutting unit
Open linear feeder
Actuate lin. feeder
Output