X3_X4_Series machine.pdf - 第175页

User manual SIPLAC E X-Series 4 Setting up and commissioning Software Version SR.601.xx 11/2005 US Edition 4.2 Del iv ery configuration and transport 175 4 Fig. 4.2 - 2 Machine in t he as-delivered configuration (1) Exte…

100%1 / 464
4 Setting up and commissioning User manual SIPLACE X-Series
4.2 Delivery configuration and transport Software Version SR.601.xx 11/2005 US Edition
174
4.2.1.2 Weight of the placement machine prepared for dispatch
The following table contains the weights of the machines prepared for dispatch, including
packaging.
4
4.2.2 Configuration when delivered
The placement machine is configured as follows when delivered:
– The extension kit on the PCB output side (item 1 in Fig. 4.2 - 2
) is detached from the basic
machine and dismantled.
– The axis unit (item 2 in Fig. 4.2 - 2
) in the extension kit on the PCB output side is placed on
a transport cushion. All cables are attached to the axis unit.
– The track on the single conveyor is set to a width of 210 mm. On the dual conveyor, the width
of conveyor track 1 is 136 mm and conveyor track 2 is 210 mm. This width setting will be
important when fine-tuning the machine.
On the dual conveyor, the electrical plug-in connectors for the conveyor motor and light bar-
rier on the left-hand conveyor track are easily accessible and there is still enough space to fit
the output conveyor.
– The output conveyors (item 4 in Fig. 4.2 - 2
) of the single or dual conveyor are dismantled.
The electrical cables to the conveyor motors and light barriers are disconnected.
– Both keyboards (item 6 in Fig. 4.2 - 2
) are unplugged.
– The supporting plates for the keyboards (item 5 in Fig. 4.2 - 2
) are detached.
– Both monitors (item 7 in Fig. 4.2 - 2
) are dismantled.
– Both main fault indicators (item 8 in Fig. 4.2 - 2
) are dismantled.
– All the gantry axes are fixed with shipping braces.
Machine Dispatch within Europe Dispatch overseas
X2 3836 kg 4336 kg
X3 3920 kg 4420 kg
X4 4004 kg 4504 kg
User manual SIPLACE X-Series 4 Setting up and commissioning
Software Version SR.601.xx 11/2005 US Edition 4.2 Delivery configuration and transport
175
4
Fig. 4.2 - 2 Machine in the as-delivered configuration
(1) Extension kit on the PCB output side - Removed and dismantled for delivery
(2) Axis unit on the PCB output side - X4: gantries 2 and 3, X3: gantry 3, X3: gantries 1 and 3
(3) Conveyor cover
(4) Output conveyor
(5) Keyboard supporting plate
(6) Keyboard
(7) Monitor
(8) Main fault indicator
(9) Computer unit on the PCB input side
(10) Extension kit on the PCB input side - may be removed if necessary
(11) Axis unit on the PCB input side - X4 and X3: gantries 1 and 4
4 Setting up and commissioning User manual SIPLACE X-Series
4.2 Delivery configuration and transport Software Version SR.601.xx 11/2005 US Edition
176
4.2.3 Transporting the placement machine in the crate
4.2.3.1 Services
SIEMENS A&D can fully integrate the X-series placement machines into your production line as
a service to you. With our extensive expertise and by using the right tools and equipment, we can
ensure that the installation process runs smoothly and efficiently. However, this will require you to
clarify the infrastructure aspects in advance and make any necessary changes at your production
facility.
Please note that the safest way to transport the placement machine is always in the transport crate
- or at the very least on the pallet. This will prevent serious damage to the machine caused by the
feet colliding with obstacles, for example.
4.2.3.2 Safety instructions
WARNING 4
– The applicable accident prevention regulations concerning the transportation of heavy goods
must be followed.
– There is a risk that the machine will tip over if you do not use the fork-lift specified in section
4.2.3.3
to transport the placement machine.
– In particular, you should wear safety boots to minimize the risk of crushing your feet.
4.2.3.3 Means of transport
A fork-lift truck with the following specification will be needed to carry the machine on the pallet or
in its crate:
Fork length: min. 1800 mm
Carrying power: min. 6000 kg
Clear width between forks: min. 350 mm 4
4